N

Title of the work

Publisher, magazine (ussue, year)

Number of printer's sheets

Co-authors

1

2

3

4

5

B O O K S

1.

Metal forming theory (variational methods of calculating forces and strains)

Metallurgizdat, USSR, 1963

42

Tarnovsky, Posdeev, Ganago et al.

2.

Drawing under conditions of fluid friction

Metallurgiya, USSR, 1967

10

Orlov, Selishchev

3.

Stresses, strains, fracture

Metallurgiya, USSR, 1970

15

-

4.

Metal forming by high-pressure liquid

Sverdlovsk Publishing House, USSR, 1970

13

Uralsky, Sokolov, Plakhotin, Koslov

5.

Hydrodynamic feed of lubricants

Metallurgiya, USSR, 1975

14

Orlov, G.Kolmogorov

6.

Deformation of metals by high-pressure liquid

Metallurgiya, USSR, 1976

22

Uralsky, Plakhotin, Sheftel et al.

7.

Contact friction in metal forming processes

Metallurgiya, USSR, 1976

22

Levanov, Burkin, Kartak et al.

8.

Plasticity and fracture

Metallurgiya, USSR, 1977

19

Bogatov, Migachev, Zudov et al.

9.

Deformability and quality

Metallurgiya, USSR, 1979

10

Parshin, Zudov

10.

Some urgent problems of the metal-forming theory

VILS Publishing House, USSR, 1979

8

-

11.

Drawing under conditions of hydrodynamic lubrication

National Landing Librery for Sciense and Technology, Boston spa, Yorkshire, england, 1968

10

Orlov, Selishchev

12.

Theory of plastyc strains of metals

Mashinostroyenie USSR, 1983

40

Unksov, Johnson, Popov et al.

13.

Mechanics of metal forming

Metallurgiya, USSR, 1986

41

-

14.

Theory of forging and stamping

Mashinostroyenie Russia, 1992

55

Unksov, Johnson, Popov et. al.

15.

Solving technological problems of metal forming with PC

Metallurgiya, 1993

20

Parshakov, Antoshechkin, et. al.

16.

The chapter "Model of metal fracture in cold deformation and plasticity resourse restoration in annealing" in the book "Material Processing Defects" edited by S.K.Ghosh and M.Predeleanu

"Elsevier",1994

1

17

The chapters "Numerical methods for singularly perturbed boundary value problems modeling diffusion processes" in the book "Singular Perturbation Problems in Chemical Physics" edited by John J.H.Miller

John Wiley & Sons, 1997

12

G.I.Shishkin

18

The chapters "A mathematical model for the formation and development of defects in metals" and "Healing of metalmicrodefects after cold deformation" in the book "Advanced methods in materials processing defects" edited by M.Predeleanu, P.Gilormini

"Elsevier", 1997

1

Smirnov

1.

Variational principles of mechanics in the metal forming theory

Metallurgizdat, USSR, 1963

3.5

Tarnovsky, Pozdeev, Weisburd et al.

2.

The use of metal plasticity resource in cold-deformed tubes manufacture

Sverdlovsk Publishing House, USSR, 1965

3.5

Uralsky, Plakhotin, Alshin et al.

3.

Manufactture of two-layer brazed tubes

Sverdlovsk Publishing House, USSR, 1966

6.5

Popovtzev, Grabovsky, Sokolov

4.

Elements of the calculus of tensors. Theory of stressed and strained states (lectures synopsis). Issue 1

UPI Publishing House, Sverdlovsk, USSR, 1974

3.4

-

5.

Physical equations and the boundary-value problem of the plasticity theory. Slip-line method (lectures synopsis). Issue 2

UPI Publishing House, Sverdlovsk, USSR, 1974

3.8

-

6.

Elements of the calculus of variations and extreme theorems of the plasticity theory (lectures synopsis). Issue 3

UPI Publishing House, Sverdlovsk, USSR, 1974

4.8

-

7.

Elements of the complex variable function theory and some applications of the latter to the problems of the plasticity theory(lectures synopsis).Issue 4

UPI Publishing House, Sverdlovsk, USSR, 1974

2.4

-

8.

Elements of the theory of physical simulation of metal-forming processes, dimensional analysis, analogues (lectures synopsis). Issue 5

UPI Publishing House, Sverdlovsk, USSR, 1975

3.4

-

9.

Mechanical properties of metals determined by standard methods (lectures synopsis). Issue 6

UPI Publishing House, Sverdlovsk, USSR, 1975

3.2

Lyashkov

10.

Resistance of metals to plastic deformation. Ductility of metals(lectures synopsis). Issue 7

UPI Publishing House, Sverdlovsk, USSR, 1975

4.0

Lyashkov

11.

Technological problems of forging and forming(lectures synopsis). Issue 8

UPI Publishing House, Sverdlovsk, USSR, 1976

2.8

-

12.

Technological problems of rolling (lectures synopsis). Issue 9

UPI Publishing House, Sverdlovsk, USSR, 1976

3.1

-

13.

Technological problems of drawing and pressing(lectures synopsis). Issue 10

UPI Publishing House, Sverdlovsk, USSR, 1976

3.5

-

14.

Special chapters of mathematics and the theory of plasticity(Problem Exercises)

UPI Publishing House, Sverdlovsk, USSR, 1974

2.2

-

15.

Decrease in metal consumption on the process stages: ingot-blank-finished product

Chermetinformatsiya, Moscow, USSR, 1970

2.7

Kachurin, Skryabin, Sokolkin et al.

16.

Optimum control and design theory

UPI Publishing House, Sverdlovsk, USSR, 1980

5.0

-

17.

Mechanics of metal forming

UPI Publishing House, Sverdlovsk, USSR, 1981

5.0

-

18.

Boundary-value problems of metal forming, their solution by variational methods and some mathematical models

USSR Academy of Sciences (Ural Branch), Sverdlovsk, 1990

3.0

-

19.

Friction and wear model of a heavy-loaded sliding pair

USSR Academy of Sciences (Ural Branch), Sverdlovsk, 1991

3.5

Kurilov, Kharlamov

SOME JOURNAL ARTICLES

1.

On the application of energy principles of plasticity to the solution of the problems of metal forming

Trudy UPI, Metallurgizdat, N64, 1958

-

2.

Calculation of strains, power and mean specific pressure in rolling tubes on a continuous mill

ibid, N73, 1958

Shveikin

3.

Calculation of strain, power and mean pressure in rolling a strip with smooth rolls

ibid

Shveikin

4.

Wall deformation at tube expansion by drawing

Stal, N7, 1959

Aleshin, Shnee

5.

Break - solution method and its exactness

Izvestiya vuzov. Chernaya metallurgiya, N3, 1962

-

6.

Compression of a thin strip by elastic stamps

ibid, N12, 1962

-

7.

Variation principles of the metal - forming theory

Rolling theory. Materialy konferentsii po teoreticheskim voprosam prokatki. Metallurgizdat, N2, 1962

Tarnovsky, Pozdeev

8.

Drawing wire of non-ferrous metals under conditions of fluid friction

Tsvetnie metally, N12, 1963

Orlov, Selishchev

9.

On the problem of metal fracture in cross forging and rolling

Izv. vuzov. Cher. met., N11, 1963

-

10.

New method of calculating stresses in metal forming

ibid, N9, 1964

Tarnovsky, Yeriklintsev

11.

Approximate variation method of calculating stresses in metal forming

Trudy Uralskogo NII Chernykh Met., vol.3, 1964

-

12.

On the problem of making vinilite - lined tubes

Stal, N2, 1961

N.A.Bogatov

13.

Stressed state in upsetting a strip with rigid ends

Izv. vuzov. Cher. met., N10, 1964

Tarnovsky, Rimm

14.

Compound dies for drawing steel wire with the lubricant under pressure

Byul. TsNIIChM N12 (467), 1964

Orlov

15.

Calculation of stress in rolling by the variation method

Izv. vuzov. Cher. Met., N12, 1964

Tarnovsky, Rimm, Vostrikov

16.

dependance of steel plasticity on hydrostatic pressure

Fizika metallov i metallovedenie, N6, 1966

Shishmintsev

17.

Development of wire and tube-drawing technology

Stal, N6, 1966

Orlov, Selishchev

18.

Rolling thin strips in elastic rolls

Izv. vuzov. Cher. met., N6, 1966

Malykh

19.

Determination of maximum strains in drawing tubes subject to the condition of metal fracture

ibid, N10, 1966

Plakhotin, Bogatov, Vostrikov

20.

On the theory of hydroextrusion of brittle metals

Fizika metallov i metallovedenie, vol.23, iss.1, 1967

Uralsky, Kozlov

21.

Ultimate deformability of metals at rupture under hydrostatic pressure

ibid

Shishmintzev, Matveev

22.

Determination of stress in upsetting a "high" strip with external zones under conditions of volume deformation

Izv. vuzov. Cher. met., N1, 1967

Yeriklintsev, Tarnovsky

23.

The principle of possible variation of stress and strain

Mekhanika tverdogotela, N2, 1967

-

24.

Visco-plastic lubricant flow in drawing under conditions of hydrody namic friction

Izv. vuzov. Cher. met., N2, 1968

G.L.Kolmogorov

25.

On the rheological properties of the drawing lubricant (soda soap)

ibid, N4, 1968

Selishchev, G.L.Kolmogorov

26.

Full speeds in drawing wire under conditions of hydrodynamic friction

Sb. NIIInformtyazh-mash,"Metallurgiches-koye oborudovanie", N1-68-6, 1968

G.L.Kolmogorov

27.

Practical experience and efficiency of drawing wire under conditions of hydrodynamic friction

Stal, N4, 1969

Orlov, Dovgopol

28.

Anwendung der hydro-dinamischen Smierung beim Drahtziehen

Neue Hutte, 14, N7, 1969

-

29.

Plasticity of metals under alternating strain

Izv. vuzov. Cher. met., N6, 1970

Bogatov, Kozlov, Krovsikov, Plakhotin

30.

Experimental check of the condition of metal fracture under various schemes of loading

ibid, N8, 1970

Bogatov, Matveyev

31.

Calculation of the tool for drawing wire under conditions of hydro dynamic friction (dry lubricant)

ibid, N10, 1970

G.L.Kolmogorov

32.

Application of the method of local variations to the calculation of asymmetrical disks

Izv. vuzov. Mashino- stroyenie, N11, 1970

Dubrovskikh, Soboleva

33.

Calculation of the tool for drawing wire under conditions of hydrodyna mic friction (liquid lubricant)

Izv. vuzov. Cher. met., N1, 1972

G.L.Kolmogorov

34.

Difference - analytic method of solving variational problems of metal forming

ibid, N10, 1972

Freidenzon, Petrov

35.

Power dissipation and kinematic correlations on speed discontinuity surfaces

Prikladnaya mekhanika i tekhnicheskaya fizika, N5, 1972

Degtyarev

36.

Condition of metal fracture at alternating deformation with an unspecified cycle form

Izv. vuzov. Cher. met., N4, 1973

Bogatov

37.

Drawing steel under conditions of hydrodynamic friction

Stal, N10, 1974

Orlov, Uralsky, Stukalov

38.

On the theory of pressing a compressible rigid-plastic material

Prikladnaya mekhanika, vol.X, iss.3, 1974

Degtyarev

39.

Turn of anisotropy axes during plane plastic deformation

Izv. vuzov. Cher. met., N2, 1975

Solovey, Zhigalin

40.

Limiting load of an anizotropic tube under internal pressure

Prikladnaya mekhanika, vol.XI, iss.7, 1975

Solovey

41.

On the methods of determining plasticity of metals by upsetting

Kuznechnostampo-vochnoye proizvodstvo, N10, 1975

Potapov, Migachev

42.

Calculation of strength of joints at combined deformation of homogeneous metals

Izv. vuzov. Cher. met., N2, 1976

Sharafutdinov, Zalazinsky

43.

Plasticity of steel in case of contact with copper, aluminium and lead melts

Izv. AN SSSR, Metally, N1, 1976

Chichigin, Burdukovsky, Antoshechkin

44.

On the possibility of increasing speed and stability of drawing under conditions of hydrodynamic friction

Izv. vuzov. Mashino- stroyenie, N9, 1977

Uralsky, Popov

45.

On the stress - strain coupling equations for compressible rigid - plastic material

Tekhnologiya legkikh splavov, N4, 1977

Loginov, Sharafutdinov

46.

Experimental check of the fracture condition at nonmonotonous deformation

Izv. vuzov. Cher. met., N10, 1977

Bogatov, Mizhiritsky

47.

More accurate methods of calculating strains at nonmonotonous deformation (strip - drawing through a smooth wedge shaped die taken as an example)

ibid, N12, 1977

Bogatov, Mizhiritsky, Serebryakov

48.

The study of deformation characteristics of cast steel 20 in the premelting temperature range

Izv. AN SSSR, Metally, N4, 1978

Chichigin, Antoshechkin, Burdukovsky, Chernikhova

49.

Solving the problem of increasing plasticity and deformability as one of the cardinal ways of improving quality of metal products and increasing efficiency of metal-forming processes

Kuznechno-stampo-voch noye proizvodstvo, N8, 1978

-

50.

Calculation of resistance of hot metal to deformation with the account of its rheonomous and viscous properties

Izv. vuzov. Cher. met., N12, 1978

Karpov

51.

The influence of hydrostatic pressure on plasticity in low-cycle fatigue of metals

Fizika metallov i metallovedenie, vol.47, iss.4, 1979

Bogatov, Mizhiritsky, Shishmintzev

52.

Boundary conditions on the slip surfaces at the deformation of a powder material

Poroshkovaya metallurgiya, N4, 1979

Loginov, Parshakov

53.

Studying the peculiarities of metal deformability in multi-operational cold deformation with intervening annealings

Izv. vuzov. Cher. met., N12, 1978

Bogatov, Smirnov

54.

Studying plastic loosening of metal and healing deformation defects in annealing

Fizika metallov i metallovedenie, vol.49, iss.2, 1980

Smirnov, Bogatov

55.

Studying friction behaviour and improving metal-forming processes

Paper read at the Conference "New Methods of Metal Forming ", 1980, Brno, (Czechoslovakia)

Serebryakov

56.

Metal fracture caused by residual stresses after metal forming

Izv. vuzov. Cher. met., N12, 1980

Bogatov, Tropotov

57.

On plasticity and deformability

Kuznechno-shtampo vochnoye proizvod-stvo, N8, 1980

-

58.

Studying friction behaviour and improving metal-forming processes

Trenie i iznos, N6, 1981

Serebryakov

59.

Estimating the damage a bility of deformed metal

Fizika metallov i metallovedenie, vol.54, iss.4, 1982

Levit, Smirnov, Bogatov et al.

60.

The problem of optimal control of the process conditions of rolling on a plate reversing mill

Izv. vuzov. Cher. met., N2, 1983

Parshakov, Konovalov, Shymov

61.

Optimal (as to time) control of metal heating in a chamber electric furnace with forced air circulation

ibid, N6, 1982

Konovalov, Kunshchikov

62.

The investigation of hydrostatic pressure and stress state influence on the plasticity of metal

High temperature, high pressure, v.8, N6, 1976

Bogatov, Shishmintsev, Belyayev, Mizhiritsky

63.

Stress - strained state in the neck of a plasticity-tested plane sample

Izv. vuzov. Cher. met., N9, 1984

Vydrin

64.

Determining the temperature field in the body under deformation by the variation - iteration method

ibid, N10, 1984

Lapovok

65.

Experimental methods of determining high temperature plasticity of steels and alloys

Kuznechno-stampo-vochnoe proizvodstvo, N7, 1985

Potapov, Migachev, Bochkarev

66.

Some problems of the theory of metal-forming

ibid, N8, 1985

-

67.

Connection of boundary-friction stresses in metal forming with contact slips and deformations near the contact

Trenie i iznos, v.7, N3, 1986

Levanov, Vydrin

68.

Optimal distribution of deformation on a drawing machine with sliding

Izv. vuzov. Cher. met., N8, 1986

Sokolovsky, Parshakov

69.

The investigation of damageability in drawing wire of low-carbon steel

Izv.AN SSSR, Metally, N2, 1987

Smirnov, Levit, Bogatov, Shalimova

70.

The influence of hydrogen on the plasticity and strain-resistance of industrial titanium BT1-0 at temperatures up to 750 C

Fizica metallov i metallovedenie, vol.67, iss.5, 1985

Aksenov, Bashkin, Ponyatovsky et al.

71.

On the history of variotional methods of solving theoretical problems of metal forming

Mezhvuzovsky sb. "Obrabotka metallov davleniem", izd. UPI, Sverdlovsk, 1987

-

72.

Calculation of the stress-strained state in radial forging

Izv. vuzov. Cher. met., N12, 1989

Konovalov, Lapovok

73.

The influence of hydrogen on the plasticity and strain - resistance of the titanium alloy BT20 at temperatures up to 740 C

Fizika metallov i metallovedenie, vol.68, iss.6, 1989

Ponyatovsky, Bashkin, Senkov, Aksenov

74.

On the equivalency of the functional of the principle of virtual velocities and stresses to the functional of standard deviations of constitutive relations

Izv. vuzov. Cher. met., N1, 1990

Lapovok, Dolmatova

75.

The influence of the rate of deformation on the plasticity of metals under pressure

Fizika metallov i metallovedenie, N6, 1990

Churbayev, Dobromyslov, Taluts

76.

Mathematical simulation and optimization of the process of thermomechanical treatment of metals

Mechanics and scien- tific - technological progress, vol.4. Application of mecha- nics to the techno- logical problems. M., "Nauka",1988

Pozdeev, Nyashin

77.

Forecasting metal fracture during hot plastic deformation

Izv. Akademii Nauk. Metally, N3, 1991

Migachev

78.

Reversible hydrogen alloying and deformation of the BT6 titanium alloy

Metallovedenie i ter-micheskaya obrabotka metallov, N2, 1992

Anisimova, Aksenov, Badayeva et al.

79.

The calculation of stress-deformed state under non-isothermic plastic flow the example of parallele piped settling

Computers & Struc-tures, Vol.44, No. 1/2, pp.419 - 424, 1992

Lapovok

80.

Special preparation of the ingost for deforma tion on the automated forging center

International Journal of Materials Proces-sing Technology, 45 (1994), pp.37-42, Elsever

0,30

Burkin, Babailov, Shakhpasov

81.

Reversible addition of hydrogen to titanium alloys

International Journal of Materials Proces-sing Technology, 40 (1994), pp.477-489

0,60

Aksenov, Anisimova

82.

Calculating deformation textures for cubic polycrystals

Textures and Micro-tstructures, 1995, Vol.23, pp.37-42

0,25

Solovei