Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading // Composite Structures. 2022. Vol. 285. 115078 p. [10.1016/j.compstruct.2021.115078].
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to Navier–Stokes Equations Describing a Gradient Nonuniform Unidirectional Vertical Vortex Fluid Flow // Dynamics. 2022. No. 2. P. 175–186. [10.3390/dynamics2020009].
Burmasheva N.V. Prosviryakov E.Yu. Influence of the Dufour Effect on Shear Thermal Diffusion Flows // Dynamics. 2022. No. 2. P. 367–379. [10.3390/dynamics2040021].
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. Effect of the stress state on the adhesive strength of an epoxy-bonded assembly // Frattura ed Integrità Strutturale. 2022. Vol. 59. P. 311-325. [10.3221/IGF-ESIS.59.21].
Ershkov S.V. Prosviryakov E.Yu. Leshchenko D. Marangoni-type of nonstationary rivulet-flows on inclined surface // International Journal of Non-Linear Mechanics. 2022. Vol. 147. 104250 p. [10.1016/j.ijnonlinmec.2022.104250].
Korobov Y. Alwan H. Soboleva N.N. Makarov A.V. Lezhnin N. Shumyakov V. Antonov M. Deviatiarov M. Cavitation Resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF Coatings // Journal of Thermal Spray Technology. 2022. Vol. 31. P. 234-246. [10.1007/s11666-021-01242-7].
Smirnov S.V. Konovalov D.A. Vichuzhanin D.I. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. The Effect of the Stress State, Testing Temperature, and Hardener Composition on the Strength of an AlMg5/Epoxy Metal-Polymer Joint // Materials. 2022. Vol.15. 7326. [10.3390/ma15207326].
Pugacheva (Vandysheva) N.B. Orishich A.M. Volkova E.G. Makarov A.V. Senaeva (Pugacheva) E.I. Malikov A.G. Role of Ultra-Fine Intermetallic Particles and Martensite in Strengthening of AISI 321/Cu/Ti Laser Welded Joint // Materials Characterization. 2022. Vol. 185. P.111702. [10.1016/j.matchar.2021.111702].
Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Numerical simulation of elastic-plastic deformation of AISI 321/Cu/Ti laser welded joint under tension and compression // Materials Characterization. 2022. Vol. 189. P. 111984. [10.1016/j.matchar.2022.111984].
Emelyanov I.G. Kislov A.N. Strength analysis of thin-wall structures operating in aggressive environments for prolonged periods // Materials Physics and Mechanics. 2022. 50(3). P. 475-484. [10.18149/MPM.5032022_10].
Putilova E. A. Zadvorkin S.M. Kryucheva K. D. Investigation of Structure and Physical-Mechanical Properties of Metal in Different Zones of Welded Trunk Pipelines Made of X80 Strength Grade Steel // Materials Research Forum LLC. 2022. Vol. 21. P. 396-402. [10.21741/9781644901755-67].
Kazakov A.L. Spevak L.F. Constructing Exact and Approximate DiffusionWave Solutions for a Quasilinear Parabolic Equation with Power Nonlinearities // Mathematics. 2022. Vol. 10. P. 1559. [10.3390/math10091559].
Savrai R.A. Toporova D.V. Bykova (Gurchenko) T.M. Improving the quality of AISI H13 tool steel produced by selective laser melting // Optics and Laser Technology. 2022. V. 152. Art. 108128. [10.1016/j.optlastec.2022.108128].
Goruleva L.S. Prosviryakov E.Yu. A New Class of Exact Solutions to the Navier–Stokes Equations with Allowance for Internal Heat Release // Optics and Spectroscopy. 2022. Vol.7. P. 15-20. [10.1134/S0030400X22070037].
Gervasyev M. A. Estemirova S.Kh. Mushnikov A.N. Sharapova V.A. Gusev A.A. Bashirova M.A. Changes in the Phase Composition of High-Manganese Steels during Tensile Deformation // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 32-36. [10.1134/S0031918X22010057].
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and Properties of a SHS Cu–Ti–C–B Composite // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 43-49. [10.1134/S0031918X22010100].
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Khudorozhkova Yu.V. Constructing a two-level computational model of cross-ply fiberglass-reinforced plastic from micromechanical testing // Polymers and Polymer Composites. 2022. Vol. 30. P. 1–13. [10.1177/09673911221112414].
Farber V.M. Morozova A.N. Khotinov V.A. Vichuzhanin D.I. Karabanalov M.S. Veretennikova (Golubkova) I.A. Lüders Deformation in Specimens Made of Normalized 09G2S Steel // Procedia Structural Integrity. 2022. Vol. 40. P. 129-135. [10.1016/j.prostr.2022.04.017].
Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Features of selecting boundary conditions when describing flows of stratified fluids // Procedia Structural Integrity. 2022. Vol. 40. P. 75-81. [10.1016/j.prostr.2022.04.009].
Burmasheva N.V. Prosviryakov E.Yu. Isothermal shear flows of viscous vortex fluids in a thin slit // Procedia Structural Integrity. 2022. Vol. 40. P. 85-89. [10.1016/j.prostr.2022.04.010].
Emelyanov I.G. Determination of the limiting state of the muffle shell // Procedia Structural Integrity. 2022. Vol. 40. P. 124-128. [10.1016/j.prostr.2022.04.016].
Kanakin V.S. Smirnov A.S. Konovalov A.V. Neural network modeling of the flow stress of the AlMg6/10% SiC metal matrix composite under deformation at high temperatures // Procedia Structural Integrity. 2022. Vol. 40. P. 194-200. [10.1016/j.prostr.2022.04.026].
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Character of Fracture after Cross-Bending of the SHS Composite by the Fe-Ni-Ti-C-B System // Procedia Structural Integrity. 2022. Vol. 40. P. 372-377. [10.1016/j.prostr.2022.04.050].
Smirnov S.V. Myasnikova M.V. Numeral Simulation of Damage and Fracture in Structurally Inhomogeneous Materials Subjected to Deformation // Procedia Structural Integrity. 2022. Vol. 40. P. 378-384. [10.1016/j.prostr.2022.04.051].
Zadvorkin S.M. Povolotskaya A.M. Detecting plastic strain localization zones in steel products by the results of magnetic measurements // Procedia Structural Integrity. 2022. Vol. 40. P. 455-460. [10.1016/j.prostr.2022.04.062].
Zalazinskiy A.G. Dvoynikov D.A. Titov V.G. Application of a genetic algorithm for multi-criteria optimization of composite pressing // Procedia Structural Integrity. 2022. Vol. 40. P. 461-469. [10.1016/j.prostr.2022.04.063].
Osipova V.A. Gorbunova T.I. Barabanov M.A. Mekhaev A.V. Vichuzhanin D.I. Smirnov S.V. Pestov A.V. New Epoxy Resin Polymerization Catalysts Based on N,N-Dimethylaminoalkylamides of Perfl uoroalkanoic Acids // Russian Journal of Applied Chemistry. 2022. Vol. 95. No. 1. P. 53-58. [10.1134/S1070427222010074].
Povolotskaya A.M. Mushnikov A.N. Features of Behavior of Magnetic Properties during Elastic Deformation of 20GN Hull Steel in Various Initial Stress–Strain States // Russian Journal of Nondestructive Testing. 2022. V. 58. P. 1000-1010. [10.1134/S1061830922700073].
Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil'mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Effect of oxygen in surface layers formed during sliding wear of Ni–ZrO2 coatings // Surface and Coatings Technology. 2022. Vol. 434. Art. 128174. [10.1016/j.surfcoat.2022.128174].
Savrai R.A. Skorynina P.A. Structural-phase transformations and changes in the properties of AISI 321 stainless steel induced by liquid carburizing at low temperature // Surface and Coatings Technology. 2022. V. 443. Art. 128613. [10.1016/j.surfcoat.2022.128613].
Putilova E. A. Kryucheva K. D. Influence of Elastic–Plastic Deformation on the Structure and Magnetic Characteristics of 13Cr-V Alloyed Steel Pipe // Symmetry. 2022. №14. P.1201. [10.3390/sym14061201].
Privalova V.V. Prosviryakov E.Yu. A New Class of Exact Solutions of the Oberbeck–Boussinesq Equations Describing an Incompressible Fluid // Theoretical Foundations of Chemical Engineering. 2022. V. 56. P. 331–338. [10.1134/S0040579522030113].
Vandyshev A.B. Kulikov V.A. Example of Design Calculation of a Membrane-Catalytic Device for Production of High-Purity Hydrogen from Hydrocarbon Raw Materials // Chemical and Petroleum Engineering. 2022. Vol. 57. Nos. 9-10. P. 740-746. [10.1007/s10556-022-01001-7].
Sergeev S.N. Safarov I.M. Galeev R.M. Gladkovsky S.V. Increase in Low-Carbon Steel 12GBA Strength and Cold Resistance by a Deformation-Thermal Effect // Metal Science and Heat Treatment. 2022. Vol. 64. P. 295–300. [10.1007/s11041-022-00804-y].
Zhilyakov A.Yu. Khristolyubov A.S. Potekhin B.A. Usoltsev E.A. Soboleva N.N. Effect of Heat Treatment on the Structure and Properties of Composite Bronzes Reinforced with Steel Dendrites // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00819-5].
Farber V.M. Morozova A.N. Vichuzhanin D.I. Zhilyakov A.Yu. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part II. Deformation Zone // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00825-7].
Shveikin V.P. Kuznetsov V.P. Kamantsev I.S. Senaeva (Pugacheva) E.I. Kuznetsov S.V. Effect of Heat Treatment on the Structure and Mechanical Properties of Tool Steel 1.6% C – 12% Cr – 0.8% Mo – 0.9% V // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00828-4].
Kamantsev I.S. Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Y. Effect of Hydrogen Sulfide Containing Environment on the Characteristics of Strength, Cyclic Endurance and Magnetic Properties of Cr – Mo – V – Nb Pipe Steel // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00823-9].
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to the Navier – Stokes Equations for Describing the Convective Flows of Multilayer Fluids / Russian Journal of Nonlinear Dynamics. 2022. Vol. 18. - no. 3. P. 397-410. [10.20537/nd220305].
Babaylov N.A. Loginov Yu.N. Polyanskiy L.I. Influence of the gap between the rolls on parameters of the roll briquetting of metallurgical lime and magnesium oxide // Chernye Metally. 2022. Iss. 6 (1086). P. 9-14. [10.17580/chm.2022.06.02].
Byval’tsev S. V. Zalazinskiy A.G. Titov V.G. Shveikin V.P. Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites // Key Engineering Materials. 2022. Vol. 910. P. 450-457. [10.4028/p-8i1j79].
Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations // Key Engineering Materials. 2022. Vol. 910. P. 988-993. [10.4028/p-s935r3].
Taratorkin A.I. Zhuk A. Rudnev A. Chernyshev N. Butuzov D. Golubev M. Fomin N. Elimination of Off-Design Operating Modes for Multiplate Clutches of Vehicle Transmission // SAE Technical Paper. 2022. 2022-01-5012. [10.4271/2022-01-5012].
Byval’tsev S. V. Titanium Drawing // Key Engineering Materials. 2022. Vol. 910. P. 193-199. [10.4028/p-1vn56i].
Gorshkov A.V. Prosviryakov E.Yu. Stagnation points of an inhomogeneous solution describing convective Ekman flow in the oceanic equatorial zone // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 52–66. [10.17804/2410-9908.2022.1.052-066].
Goruleva L.S. Prosviryakov E.Yu. Unidirectional Steady-State Inhomogeneous Couette Flow with a Quadratic Velocity Profile Along a Horizontal Coordinate // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 3. P. 47-60. [10.17804/2410-9908.2022.3.047-060].
Goruleva L.S. Zadvorkin S.M. Mushnikov A.N. Effect of Plastic Deformation on the Phase Composition and Electromagnetic Characteristics of the 321n Austenitic Steel (08kh18n10t) // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 95-106. [10.17804/2410-9908.2022.6.095-106].
Kazakov A.L. Spevak L.F. Chuev N.P. An analytical and numerical study of free boundary dynamics for an isolated mass of a self-gravitating gas // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 61–80. [10.17804/2410-9908.2022.4.061-080].
Klimova O.V. An Optimization Approach to the Development of Parallel Algorithms for Digital Signal Processing Operations // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 1. P. 6-15. [10.17804/2410-9908.2022.1.006-015].
Mushnikov A.N. Zadvorkin S.M. Perunov E.N. Vyskrebencev S.V. Izmajlov R.F. Vichuzhanin D.I. Soboleva N.N. Igumnov A.S. Experimental facility for studying the physical properties of materials in a plane stress state // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 50-60. [10.17804/2410-9908.2022.4.050-060].
Pugacheva (Vandysheva) N.B. Polyakov P.A. The effect of boron on the protective properties of aluminide coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 25–34. [10.17804/2410-9908.2022.6.025-034].
Putilova E. A. Goruleva L.S. Zadvorkin S.M. Effect of Frictional Treatment of the Aisi 321 Steel on the Change of Its Hardness and Magnetic Characteristics // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 40-49. [10.17804/2410-9908.2022.5.040-049].
Soboleva N.N. Davydova (Pozdejeva) N.A. Makarov A.V. The Effect of the multiplicity of frictional action on the micromechanical properties of NiCrBSi-coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 50-59. [10.17804/2410-9908.2022.5.050-059].
Struzhanov V.V. On one model of deformation in laminated composites // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 16–24. [10.17804/2410-9908.2022.1.016-024].
Vandyshev A.B. Estimating the effect of some individual technological factors on the effectiveness of producing high-purity hydrogen from hydrocarbons in catalytic membrane devices // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 6–36. [10.17804/2410-9908.2022.4.006-036].
Nikolin Yu.V. Vichuzhanin D.I. Pugacheva (Vandysheva) N.B. Mezin F.I. Studying the adhesion strength of plasma powder metal coatings on the surface of graphite // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 23–39. [10.17804/2410-9908.2022.5.023-039].
Struzhanov V.V. Chaikin A.E. Destruction of a protective pipe coating under cyclic loading by internal pressure // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 2. P. 55– 66. [10.17804/2410-9908.2022.2.055-066].
Hoodorozhkov S. Yurkevich A.V. Theoretical and Experimental Study of the Vehicle’s Dynamics Equipped with the Mechanical Stepless Transmission // Lecture Notes in Networks and Systems. 2022. Vol. 509. P. 787-796. [10.1007/978-3-031-11058-0_79].
Ershkov S.V. Prosviryakov E.Yu. Leshchenko D. Flow of a Viscous Incompressible Fluid from a Moving Point Source // Symmetry. 2022. No. 14. 2156 p. [10.3390/ sym14102156].
Prosviryakov E.Yu. Goruleva L.S. Nonuniform Couette–Poiseuille Shear Flow with a Moving Lower Boundary of a Horizontal Layer // Technical Physics Letters. 2022. Vol. 48. Iss. 9. P. 450-454. [10.1134/S1063785022090024].
Salikhyanov D.R. Veselova V.E. Volkov V. Flow Behavior and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Produced by Selective Laser Melting Compared to Wrought // International Journal of Advanced Manufacturing Technology. 2021. https://doi.org/10.1007/s00170-021-08000-7.
Savrai R.A. Kogan L.Kh. Eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact-fatigue loading // Russian Journal of Nondestructive Testing. 2021. V. 57. No. 5. P. 393-400. DOI: 10.1134/S1061830921050119. in Russian
Mironov V.I. Emelyanov I.G. Lukashuk O.A. Criteria of material failure in relation to hydrogen saturation // Solid State Phenomena. 2021. Vol. 316 SSP. P. 484-489. 2-s2.0-85106165052&origin=inward&txGid=7f9ba3c5bd161f4e44bc73789203a5c9. DOI: 10.4028/www.scientific.net/SSP.316.484.
Bashurov V.V. Prosviryakov E.Yu. Steady thermo-diffusive shear Couette flow of incompressible fluid. Velocity field analysis // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2021. Vol. 25. Iss. 4. P. 781-793. DOI: https://doi.org/10.14498/vsgtu1878. in Russian
Burmasheva N.V. Prosviryakov E.Yu. Exact solutions to the Navier–Stokes equations describing stratified fluid flows // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2021. Vol. 25. Iss. 3. P. 491-507. DOI: https://doi.org/10.14498/vsgtu1860.
Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. A Couette-Type Flow with a Perfect Slip Condition on a Solid Surface // Vestnik Tomskogo gosudarstvennogo universiteta, Matematika i mekhanika [Tomsk State University Journal of Mathematics and Mechanics]. 2021. Iss. 74. P. 79-94. DOI 10.17223/19988621/74/9. in Russian
Prosviryakov E.Yu. Recovery of radial-axial velocity in axisymmetric swirling flows of a viscous incompressible fluid in the Lagrangian consideration of vorticity evolution // VESTNIK UDMURTSKOGO UNIVERSITETA-MATEMATIKA MEKHANIKA KOMPYUTERNYE NAUKI. 2021. Vol. 31. Iss. 3. P. 505-516. DOI: 10.35634/vm210311. in Russian
Byval’tsev S. V. Experiment planning subsystem for intellectual system of improvement of pressure processing processes // AIP Conference Proceedings. 2021. Vol. 2402. 070017. https://doi.org/10.1063/5.0071581.
Byval’tsev S. V. Iskritskiy A.I. Augmented Reality on the Internet of Things // AIP Conference Proceedings. 2021. Vol. 2402. 050009. https://doi.org/10.1063/5.0071579.
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Kanakin V.S. Using the Instrumented Indentation Technique to Determine Damage in Sintered Metal Matrix Composites after High-Temperature Deformation // Applied Sciences-Basel. 2021. Vol. 11. Iss. 22. 10590. https://doi.org/10.3390/app112210590.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to the Oberbeck–Boussinesq Equations for Shear Flows of a Viscous Binary Fluid with Allowance Made for the Soret Effect // BULLETIN OF IRKUTSK STATE UNIVERSITY-SERIES MATHEMATICS. 2021. Vol. 37. P. 17-30. https://doi.org/10.26516/1997-7670.2021.37.17. in Russian
Ershkov S.V. Prosviryakov E.Yu. Burmasheva N.V. Christianto Victor Towards understanding the algorithms for solving the Navier–Stokes equations // Fluid Dynamics Research. 2021. Vol. 53. 044501. https://doi.org/10.1088/1873-7005/ac10f0.
Illarionov A.G. Vodolazskiy F.V. Barannikova N.A. Kosmatskiy Ya.I. Khudorozhkova Yu.V. Khudorozhkova. Influence of phase composition on thermal expansion of Ti-0.4Al, Ti-2.2Al-2.5Zr and Ti-3Al-2.5V alloys // Journal of Alloys and Compounds. 2021. Vol. 857. 158049. – https://doi.org/10.1016/j.jallcom.2020.158049.
Zadvorkin S.M. Goruleva L.S. Evaluation of Residual Stresses in Steel Products Using Magnetic Methods // Journal of Machinery Manufacture and Reliability. 2021. No. 2. P. 118-132. DOI: 10.3103/S1052618821020151. in Russian
Menshakov A.I. Bruhanova Yu.A. Surkov Yu.S. Skorynina P.A. Investigation of the plasma composition of a discharge with a self-heating hollow cathode and an active anode in a gas mixture with titanium and hexamethyldisilazane vapors // Journal of Physics: Conference Series. 2021. V. 2064. 012046. doi: 10.1088/1742-6596/2064/1/012046.
Menshakov A.I. Bruhanova Yu.A. Skorynina P.A. Obtaining of TiSiCN coatings by anodic evaporation of titanium and decomposition of hexamethyldisilazane in a low-pressure arc discharge // Journal of Physics: Conference Series. 2021. V. 1954. 012032. doi: 10.1088/1742-6596/1954/1/012032.
Saraev Yu.N. Kamantsev I.S. Grigoryeva A.A. Kuznetsov A.V. Nepomnyashchiy A.S. Finding ways to improve the performance of welded joints based on controlled heat input and use of shock-mechanical treatment // Journal of Physics: Conference Series. 2021. Vol. 1791. 012118. doi: 10.1088/1742-6596/1791/1/012118.
Lezhnin N.V. Makarov A.V. Kuznetsov V.P. Vladimirov A.B. Skorynina P.A. Sirosh V.A Adhesion strength of Ti1-xCx – DLC multilayer nanocomposite thin films coated by ion-plasma deposition on martensitic stainless steel produced by selective laser melting followed by plasma-nitriding and burnishing // Journal of Physics: Conference Series. 2021. V. 2064. – 012082. doi: 10.1088/1742-6596/2064/1/012082.
Kazakov A.L. Lempert A.A. Spevak L.F. On an exact solution to the nonlinear heat equation with a source // Journal of Physics: Conference Series. 2021. Vol. 1847. 012006. doi:10.1088/1742-6596/1847/1/012006.
Makarov A.V. Kuznetsov V.P. Skorynina P.A. Sirosh V.A. Vladimirov A.B. Lezhnin N.V. Kolmakov S.V. Plasma nitriding in complex post-processing of stainless steel parts obtained by additive laser technology // Journal of Physics: Conference Series. 2021. V. 2064. 012075. doi: 10.1088/1742-6596/2064/1/012075.
Ogorelkov D. A. Lukashuk O.A. Forecasting the life of a structure relative to the operating mode // Journal of Physics: Conference Series.. 2021. V. 2094. 042061. doi: 10.1088/1742-6596/2094/4/042061.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Brittle fracture resistance and damping properties of layered metal-polymer composites // Letters on Materials. 2021. Vol. 11. Iss. 3. P. 279-284. DOI: https://doi.org/10.22226/2410-3535-2021-3-279-284. in Russian
Savrai R.A. Osinceva A.L. Effect of hardened surface layer obtained by frictional treatment on the contact endurance of the AISI 321 stainless steel under contact gigacycle fatigue tests // Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021. Vol. 802. – Art. 140679. P. 1-10. DOI: 10.1016/j.msea.2020.140679.
Mironov V.I. Lukashuk O.A. Ogorelkov D. A. On Durability of Structurally Inhomogeneous Materials // Materials Science Forum. 2021. Vol. 1031. P. 24-30. doi:10.4028/www.scientific.net/MSF.1031.24.
Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 2035-2037. https://doi.org/10.1016/j.matpr.2020.10.039.
Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Heat treatment effect on ledeburite alloys wear resistance // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 1810-1812. https://doi.org/10.1016/j.matpr.2020.08.417.
Dvoynikov D.A. Gladkovsky S.V. Multi-Criteria Selection of Quantitative Composition of Alloying Elements of Maraging Steels of the Fe–Cr–Ni–Mo System with an Improved Set of Mechanical Properties // Metallurgist. 2021. Vol. 65. Nos. 5-6. P. 522-528. DOI: 10.1007/s11015-021-01186-x. in Russian
Sergeev S.N. Safarov I.M. Zhilyaev A.P. Galeev R.M. Gladkovsky S.V. Dvoynikov D.A. Effect of Deformation-Thermal Processing on the Microstructure and Mechanical Properties of Low-Carbon Structural Steel // Physics of Metals and Metallography. 2021. Vol. 122. No. 6. P. 621-627. DOI: 10.1134/S0031918X21060090. in Russian
Kruchkov D.I. Smirnov S.V. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Influence of All-Round Forging under Short-Term Creep Conditions on the Structure and Mechanical Properties of the Al7075/10SiCp Composite with an Aluminum Matrix // Physics of Metals and Metallography. 2021. Vol. 122. No. 10. P. 981-990. DOI: 10.1134/S0031918X21100069. in Russian
Pugacheva (Vandysheva) N.B. Kruchkov D.I. Nesterenko A.V. Smirnov S.V. Shveikin V.P. Studying the Short-Term High-Temperature Creep in the Al–6Zn–2.5Mg–2Cu/10SiCp Aluminum Matrix Composite // Physics of Metals and Metallography. 2021. Vol. 122. No. 8. P. 782-788. DOI: 10.1134/S0031918X21080111. in Russian
Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Yu. A Study of the Structure and Physicomechanical Properties of Promising High-Strength Economically Alloyed Steel for Oil and Gas Production Pipes Operating under Extreme Conditions // Physics of Metals and Metallography. 2021. Vol. 122. No. 9. P. 923-930. DOI: 10.1134/S0031918X21090118. in Russian
Savrai R.A. Kolobyilin Yu.M. Volkova E.G. Micromechanical characteristics of the surface layer of metastable austenitic steel after frictional treatment // Physics of Metals and Metallography. 2021. V. 122. No. 8. P. 800-806. DOI: 10.1134/S0031918X21080123. in Russian
Smirnov A.S. Khudorozhkova Yu.V. Konovalov A.V. Degradation of the Mechanical Properties of Fiberglass Under Discontinuous High-Temperature Loading // Procedia Structural Integrity. 2021. Vol. 32. P. 321-325. DOI: 10.1016/j.prostr.2021.09.046.
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov Aleksander Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State // Procedia Structural Integrity. 2021. Vol. 33. P. 259-264. DOI: 10.1016/j.prostr.2021.10.032.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. The Effect of Cyclic Preloading on the Magnetic Behavior of the Hot-Rolled 08G2B Steel Under Elastic Uniaxial Tension // Research in Nondestructive Evaluation. 2021. Vol. 32. No. 6. P. 276-294. DOI: 10.1080/09349847.2021.2002487.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions for Steady Convective Layered Flows with a Spatial Acceleration // Russian Mathematics. 2021. Vol. 65. No. 7. P. 8-16. DOI: 10.3103/S1066369X21070021. in Russian
Privalova V.V. Prosviryakov E.Yu. Layered Marangoni convection with the Navier slip condition // SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES. 2021. Vol. 46. Iss. 1. Article number: 55. https://doi.org/10.1007/s12046-021-01585-5.0.
Savrai R.A. Morozova A.N. A review of studies in the field of production of coatings on metals by means of mechanical alloying // Surfaces and Interfaces. 2021. V. 27. Art. 101451. https://doi.org/10.1016/j.surfin.2021.101451.
Ershkov S.V. Rachinskaya A. Prosviryakov E.Yu. Shamin R.V. On the Semi-Analytical Solutions in Hydrodynamics of Ideal Fluid Flows Governed by Large-Scale Coherent Structures of Spiral-Type // Symmetry-Basel. 2021. Vol. 13. Article ID 2307. https://doi.org/ 10.3390/sym13122307.
