Savrai R.A. Skorynina P.A. Makarov A.V. Men’shakov A.I. Gaviko V.S. The influence of frictional treatment and low-temperature plasma carburizing on the structure and phase composition of metastable austenitic steel // Physics of Metals and Metallography. 2023. V. 124. No. 5. P. 496-503. [10.1134/S0031918X23600483].
Mushnikov A.N. Zadvorkin S.M. Vichuzhanin D.I. Soboleva N.N. Effect of Biaxial Tension on the Coercive Force of Low-Alloy Steel // Journal of Nondestructive Evaluation. 2023. V. 42. Article number 94. [10.1007/s10921-023-01012-1].
Menshakov A. Bruhanova Yu. Skorynina P.A. Medvedev A. Plasma enhanced high‐rate deposition of advanced film materials by metal reactive evaporation in organosilicon vapors // Membranes. 2023. V. 13 (4). Art. 374. [10.3390/membranes13040374].
Savrai R.A. Skorynina P.A. Makarov A.V. Kogan L.Kh. Men’shakov A.I. The influence of frictional treatment and low-temperature plasma carburizing on the microhardness and electromagnetic properties of metastable austenitic steel // Physics of Metals and Metallography. 2023. V. 124. No. 8. P. 816-823. [10.1134/S0031918X23601166].
Emelyanov I.G. Ogorelkov D. A. Fatigue of a cylindrical shell lying on a rigid bed // Procedia Structural Integrity. – 2023. - V. 50. - P. 57-64. [10.1016/j.prostr.2023.10.022] // Procedia Structural Integrity. 2023. V. 50. P. 57-64. [10.1016/j.prostr.2023.10.022].
Putilova E. A. Goruleva L.S. Zadvorkin S.M. Skorynina P.A. Savrai R.A. Kryucheva K. D. Evolution of the structure and physical-mechanical properties of metastable steel after surface frictional treatment with varying loading on the indenter // Letters on materials. 2023. V.13. No.3. P. 191-196. [10.22226/2410-3535-2023-3-191-196].
Emelyanov I.G. Hodak A.S. Thin-walled shell service life under variable thermomechanical load // Procedia Structural Integrity. 2023. V. 50. P. 50-56. [10.1016/j.prostr.2023.10.021].
Emelyanov I.G. Ogorelkov D. A. Fatigue of a cylindrical shell lying on a rigid bed // Procedia Structural Integrity. 2023. V. 50. P. 57-64. [10.1016/j.prostr.2023.10.022].
Koroleva (Chekhomova) L.F. Savrai R.A. Prosviryakov E.Yu. Kostarev V.A. Pavlyishko S.V. Kostarev P. V. The Effect of Abrasive Additives on the Tribotechnical Properties of Lubricants for the Wheel–rail System // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 1. P. 54-64. [10.17804/2410-9908.2023.1.054-064].
Emelyanov I.G. Kislov A.N. Strength analysis of thin-wall structures operating in aggressive environments for prolonged periods // Materials Physics and Mechanics. 2022. 50(3). P. 475-484. [10.18149/MPM.5032022_10].
Savrai R.A. Kogan L.Kh. Effect of hardening frictional treatment on features of eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact fatigue loading // Russian Journal of Nondestructive Testing. 2022. V. 58. No. 8. P. 722–731. [10.1134/S1061830922080095].
Emelyanov I.G. Mironov V.I. Lukashuk O. Procedure for Solving a Physical-Mechanical Problem of Determining Stress Fields, Temperatures and Hydrogen Concentration // AIP Conference Proceedings. 2022. Vol. 2456 020026. [10.1063/5.0074691].
Korobov Y. Alwan H. Soboleva N.N. Makarov A.V. Lezhnin N. Shumyakov V. Antonov M. Deviatiarov M. Cavitation Resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF Coatings // Journal of Thermal Spray Technology. 2022. Vol. 31. P. 234-246. [10.1007/s11666-021-01242-7].
Pugacheva (Vandysheva) N.B. Orishich A.M. Volkova E.G. Makarov A.V. Senaeva (Pugacheva) E.I. Malikov A.G. Role of Ultra-Fine Intermetallic Particles and Martensite in Strengthening of AISI 321/Cu/Ti Laser Welded Joint // Materials Characterization. 2022. Vol. 185. P.111702. [10.1016/j.matchar.2021.111702].
Emelyanov I.G. Kislov A.N. Strength analysis of thin-wall structures operating in aggressive environments for prolonged periods // Materials Physics and Mechanics. 2022. 50(3). P. 475-484. [10.18149/MPM.5032022_10].
Savrai R.A. Toporova D.V. Bykova (Gurchenko) T.M. Improving the quality of AISI H13 tool steel produced by selective laser melting // Optics and Laser Technology. 2022. V. 152. Art. 108128. [10.1016/j.optlastec.2022.108128].
Emelyanov I.G. Determination of the limiting state of the muffle shell // Procedia Structural Integrity. 2022. Vol. 40. P. 124-128. [10.1016/j.prostr.2022.04.016].
Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil'mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Effect of oxygen in surface layers formed during sliding wear of Ni–ZrO2 coatings // Surface and Coatings Technology. 2022. Vol. 434. Art. 128174. [10.1016/j.surfcoat.2022.128174].
Savrai R.A. Skorynina P.A. Structural-phase transformations and changes in the properties of AISI 321 stainless steel induced by liquid carburizing at low temperature // Surface and Coatings Technology. 2022. V. 443. Art. 128613. [10.1016/j.surfcoat.2022.128613].
Vandyshev A.B. Kulikov V.A. Example of Design Calculation of a Membrane-Catalytic Device for Production of High-Purity Hydrogen from Hydrocarbon Raw Materials // Chemical and Petroleum Engineering. 2022. Vol. 57. Nos. 9-10. P. 740-746. [10.1007/s10556-022-01001-7].
Zhilyakov A.Yu. Khristolyubov A.S. Potekhin B.A. Usoltsev E.A. Soboleva N.N. Effect of Heat Treatment on the Structure and Properties of Composite Bronzes Reinforced with Steel Dendrites // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00819-5].
Mushnikov A.N. Zadvorkin S.M. Perunov E.N. Vyskrebencev S.V. Izmajlov R.F. Vichuzhanin D.I. Soboleva N.N. Igumnov A.S. Experimental facility for studying the physical properties of materials in a plane stress state // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 50-60. [10.17804/2410-9908.2022.4.050-060].
Soboleva N.N. Davydova (Pozdejeva) N.A. Makarov A.V. The Effect of the multiplicity of frictional action on the micromechanical properties of NiCrBSi-coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 50-59. [10.17804/2410-9908.2022.5.050-059].
Vandyshev A.B. Estimating the effect of some individual technological factors on the effectiveness of producing high-purity hydrogen from hydrocarbons in catalytic membrane devices // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 6–36. [10.17804/2410-9908.2022.4.006-036].
Savrai R.A. Kogan L.Kh. Eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact-fatigue loading // Russian Journal of Nondestructive Testing. 2021. V. 57. No. 5. P. 393-400. DOI: 10.1134/S1061830921050119. in Russian
Mironov V.I. Emelyanov I.G. Lukashuk O.A. Criteria of material failure in relation to hydrogen saturation // Solid State Phenomena. 2021. Vol. 316 SSP. P. 484-489. 2-s2.0-85106165052&origin=inward&txGid=7f9ba3c5bd161f4e44bc73789203a5c9. DOI: 10.4028/www.scientific.net/SSP.316.484.
Menshakov A.I. Bruhanova Yu.A. Surkov Yu.S. Skorynina P.A. Investigation of the plasma composition of a discharge with a self-heating hollow cathode and an active anode in a gas mixture with titanium and hexamethyldisilazane vapors // Journal of Physics: Conference Series. 2021. V. 2064. 012046. doi: 10.1088/1742-6596/2064/1/012046.
Menshakov A.I. Bruhanova Yu.A. Skorynina P.A. Obtaining of TiSiCN coatings by anodic evaporation of titanium and decomposition of hexamethyldisilazane in a low-pressure arc discharge // Journal of Physics: Conference Series. 2021. V. 1954. 012032. doi: 10.1088/1742-6596/1954/1/012032.
Lezhnin N.V. Makarov A.V. Kuznetsov V.P. Vladimirov A.B. Skorynina P.A. Sirosh V.A Adhesion strength of Ti1-xCx – DLC multilayer nanocomposite thin films coated by ion-plasma deposition on martensitic stainless steel produced by selective laser melting followed by plasma-nitriding and burnishing // Journal of Physics: Conference Series. 2021. V. 2064. – 012082. doi: 10.1088/1742-6596/2064/1/012082.
Makarov A.V. Kuznetsov V.P. Skorynina P.A. Sirosh V.A. Vladimirov A.B. Lezhnin N.V. Kolmakov S.V. Plasma nitriding in complex post-processing of stainless steel parts obtained by additive laser technology // Journal of Physics: Conference Series. 2021. V. 2064. 012075. doi: 10.1088/1742-6596/2064/1/012075.
Savrai R.A. Osinceva A.L. Effect of hardened surface layer obtained by frictional treatment on the contact endurance of the AISI 321 stainless steel under contact gigacycle fatigue tests // Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021. Vol. 802. – Art. 140679. P. 1-10. DOI: 10.1016/j.msea.2020.140679.
Savrai R.A. Kolobyilin Yu.M. Volkova E.G. Micromechanical characteristics of the surface layer of metastable austenitic steel after frictional treatment // Physics of Metals and Metallography. 2021. V. 122. No. 8. P. 800-806. DOI: 10.1134/S0031918X21080123. in Russian
Savrai R.A. Morozova A.N. A review of studies in the field of production of coatings on metals by means of mechanical alloying // Surfaces and Interfaces. 2021. V. 27. Art. 101451. https://doi.org/10.1016/j.surfin.2021.101451.
Emelyanov I.G. Mironov V.I. Strength of Shell Structure Operating in Hydrogenous Media under Pressure // Transportation Research Procedia. 2021. Vol. 54. P. 484-494. 10.1016/J.TRPRO.2021.02.099.
Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil’mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Tribological performance of boron-based superhard coatings sliding against different materials // Wear. 2021. Vol. 477. 203835. https://doi.org/10.1016/j.wear.2021.203835.
Vandyshev A.B. Kulikov V.A. Analysis of Parameters for Producing High-Purity Hydrogen from Natural Gas in a Tubular Type Membrane-Catalytic Module // Chemical and Petroleum Engineering. 2021. Vol. 56. Nos. 9-10. P. 715-720. DOI: 10.1007/s10556-021-00833-z. in Russian
Vandyshev A.B. Kulikov V.A. Assessment of the Effect of Hydrocarbon and Steam Mixture Flow Rate on the Main Parameters of High-Purity Hydrogen Production in a Membrane-Catalytic Device with a Fixed Membrane Area // Chemical and Petroleum Engineering. 2021. Vol. 57. Nos. 7-8. P. 639-646. DOI: 10.1007/s10556-021-00989-8. in Russian
Vandyshev A.B. Kulikov V.A. Assessment of the Effects of Temperature and Pressure on the Efficiency of High-Purity Hydrogen Production from Hydrocarbon Feedstocks in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2021. Vol. 56. No. 9-10. P. 799-808. DOI: 10.1007/s10556-021-00845-9. in Russian
Alwan H.L. Makarov A.V. Soboleva N.N. Korobov Yu.S. Shumyakov V.I. Lezhnin N.V. Zavalishin V.A. Using a Procedure for Estimating Cavitation Impact for Analyzing the Erosion Resistance of Cermet Thermal Sprayed Coatings // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 778-784. DOI: 10.3103/S1067821221060031. in Russian
Soboleva N.N. Makarov A.V. Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 682-691. DOI: 10.3103/S1067821221060183. in Russian
Korobov Yu.S. Alwan H.L. Filippov M.A. Soboleva N.N. Alani I.A. Estemirova S.Kh. Makarov A.V. Sirosh V.A. The effect of martensitic transformation on the cavitation erosion resistance of a TIG-deposited Fe-Cr-C-Al-Ti layer // Surface and Coatings Technology. 2021. Vol. 421. 127391. https://doi.org/10.1016/j.surfcoat.2021.127391.
Alwan H.L. Korobov Yu.S. Elkind D.M. Sirosh V.A. Makarov A.V. Comparative analysis of cavitation resistance of deposited/sprayed layers of carbides, stainless steels and metastable austenite // IOP Conference Series: Materials Science and Engineering. 2021. Vol. 1079. 052073. DOI: 10.1088/1757-899X/1079/5/052073.
Starikova U.S. Soboleva N.N. Makarov A.V. Kharanzhevsky E.V. The influence of boron carbide additive on the structure and hardness of a nickel-based coating // Frontier Materials & Technologies. 2021. No. 4. P. 89–97. DOI: 10.18323/2782-4039-2021-4-89-97. in Russian
Skorynina P.A. Makarov A.V. Berezovskaya V.V. Merkushkin E.A. Chekan N.M. Effect of nanostructuring frictional treatment on micromechanical and corrosion properties of stable austenitic chromium-nickel steel // Frontier Materials & Technologies. 2021. No. 4. P. 80–88. DOI: 10.18323/2782-4039-2021-4-80-88. in Russian
Savrai R.A. Gladkovsky S.V. Lepikhin S.V. Kolobyilin Yu.M. Approaches to the Development of Wear-Resistant Laminated Metal Composites [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 5. P. 24-35. DOI: 10.17804/2410-9908.2021.5.24-35.
Savrai R.A. Skorynina P.A. Makarov A.V. Osinceva A.L. Effect of liquid carburizing at lowered temperature on the micromechanical characteristics of metastable austenitic steel / Physics of Metals and Metallography. 2020. Vol. 121. No. 10. P. 1015-1020. DOI: 10.1134/S0031918X20100105. in Russian
Emelyanov I.G. Mironov V.I. Determination of the Tensile Strength of the 09G2S Steel Taking into Account the Effect of Hydrogen // AIP Conference Proceedings. 2020. Vol. 2315. 020016. https://doi.org/10.1063/5.0036911. I.
Emelyanov I.G. Ogorelkov D. A. The Stress State of a Thick-Walled Steel Shell Taking into Account Contact with a Hydrogen-Containing Medium // AIP Conference Proceedings. 2020. Vol. 2315. 020017. https://doi.org/10.1063/5.0036912.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Effect of the Laser Welding Conditions on the Chemical Composition of the AISI 321/Cu/Ti Material // AIP Conference Proceedings. 2020. Vol. 2315. 030015. https://doi.org/10.1063/5.0036864.
Mironov V.I. Emelyanov I.G. Lukashuk O.A. Diagram of plastic material transition into brittle state under hydrogen saturation // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 022020. DOI: 10.1088/1757-899X/862/2/022020.
Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Hodak A.S. Stressed State of the Titanile Shell, Operating in a Medium with Hydrogen // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033021. doi:10.1088/1757-899X/709/3/033021.
Makarov A.V. Kuznetsov V.P. Sirosh V.A. Volkova E.G. Skorynina P.A. Merkushev A.G. Structural and micromechanical properties of 316L stainless steel produced by selective laser melting // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 1008. 012005. doi: 10.1088/1757-899X/1008/1/012005.
Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Structural and phase transformations in austenitic chromium-nickel steels during nanostructuring frictional treatment // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 1008. 012055. doi: 10.1088/1757-899X/1008/1/012055.
Soboleva N.N. Makarov A.V. Nikolaeva E.P. Skorynina P.A. Malyigina I.Yu. Effect of frictional treatment with a dense cubic boron nitride indenter on the micromechanical properties of the NiCrBSi–Cr3C2 // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012050. https://iopscience.iop.org/article/10.1088/1757-899X/966/1/012050.
Savrai R.A. Kogan L.K. Makarov A.V. Soboleva N.N. Features of eddy-current testing of the fatigue degradation of laser clad cobalt-nickel-chromium coating under contact loading // Letters on Materials. 2020. V. 10. Is. 3. P. 315-321. DOI: 10.22226/2410-3535-2020-3-315-321. in Russian
Soboleva N.N. Makarov A.V. Zavarzina E.P. Skorynina P.A. Malyigina I.Yu. Features of frictional treatment of the composite NiCrBSi-Cr3C2 laser clad coating // Letters on Materials. 2020. Vol. 10. No. (4). P. 506-511. https://doi.org/10.22226/2410-3535-2020-4-506-511. in Russian
Alwan H.L. Korobov Yu.S. Soboleva N.N. Prokopyev D.A. Cavitation erosion – corrosion behavior of Fe-Cr steel induced by ultrasonic vibration // Materials Science Forum. 2020. Vol. 98. P. 312-317. https://doi.org/10.4028/www.scientific.net/MSF.989.312.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. 2020. V. 61. Nos. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1. in Russian
Soboleva N.N. Makarov A.V. Stepchenkov A.K. Malyigina I.Yu. Korobov Yu.S. Influence of thermal effects on the micromechanical properties of the nickel-chromium coating obtained by gas powder laser cladding // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 104–117. DOI: 10.17212/1994-6309-2020-22.2-104-117. (In Russian). in Russian
Savrai R.A. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The structural characteristics and contact loading behavior of gas powder laser clad CoNiCrW coating // Optics and Laser Technology. 2020. V. 126. Art. 106079. P. 1-8. DOI: 10.1016/j.optlastec.2020.106079.
Berezovskaya V.V. Savrai R.A. Maslova O.V. Ovchinnikov V.V. Gushchina N.V. Influence of irradiation with Ar+ ions on the process of the delayed fracture of a maraging steel // Physics of Metals and Metallography. 2020. Vol. 121. No. 3. P. 291-297. DOI: 10.1134/S0031918X20030035. in Russian
Savrai R.A. Skorynina P.A. Makarov A.V. Osinceva A.L. Structure and surface properties of metastable austenitic steel subjected to liquid carburizing at a reduced temperature // Physics of Metals and Metallography. 2020. Vol. 121. No. 1. P. 65-71. DOI: 10.1134/S0031918X20010135. in Russian
Alwan H.L. Korobov Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Study of Cavitation Erosion-Corrosion Resistance of Thermally Sprayed Ni-Based Coatings Prepared by HVAF Process // Solid State Phenomena. 2020. Vol. 299. P. 893–901. https://doi.org/10.4028/www.scientific.net/SSP.299.893.
Alwan H.L. Korobov Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Nikolaeva E.P. Deviatiarov M.S. Cavitation Erosion-Corrosion Resistance of Deposited Austenitic Stainless Steel/E308L-17 Electrode // Solid State Phenomena. 2020. Vol. 299. P. 908–913. https://doi.org/10.4028/www.scientific.net/SSP.299.908.
Makarov A.V. Savrai R.A. Skorynina P.A. Volkova E.G. Development of methods for steel surface deformation nanostructuring // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 1-2. P. 61-69. DOI: 10.1007/s11041-020-00513-4. in Russian
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. – 2020. – V. 61. – Nos. 11-12. – P. 764-768. – DOI: 10.1007/s11041-020-00497-1 // Metal Science and Heat Treatment. 2020. V. 61. No. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1.
Kharanzhevskiy E.V. Ipatov A.G. Krivilyov M.D. Makarov A.V. Gil'mutdinov F.Z. Volkova E.G. Ultralow friction behaviour of B4C-BN-MeO composite ceramic coatings deposited on steel // Surface and Coatings Technology. 2020. V. 390. Art. 125664. DOI: 10.1016/j.surfcoat.2020.125664.
Zhidkov I.S. Kukharenko A.I. Makarov A.V. Savrai R.A. Gavrilov N.V. Cholakh S.O. Kurmaev E.Z. XPS characterization of surface layers of stainless steel nitrided in electron beam plasma at low temperature // Surface and Coatings Technology. 2020. V. 386. Art. 125492. DOI: 10.1016/j.surfcoat.2020.125492.
Zimogliadova T.A. Bushueva E.G. Shtertser A.A. Grinberg B.E. Soboleva N.N. Kollmannsberger E. Chakin I.K. Bibko D.S. Leonov A.V. Safarova D.E. Structure features and wear resistance of layers, formed by Ni-based self-fluxing alloy combined with boron by electron beam, revealed in the air atmosphere // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 89–103. DOI: 10.17212/1994-6309-2020-22.2-89-103. (In Russian). in Russian
Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // Advances in Intelligent Systems and Computing. 2020. Vol. 1115. P. 340-348. https://doi.org/10.1007/978-3-030-37916-2_33.
Kharanzhevskiy E. Ipatov A. Krivilyov M. Makarov A.V. Model experiment on reactive phase formation and solidi cation of B4C-BN composites via nanosecond pulse laser processing // European Physical Journal: Special Topics. 2020. Vol. 229. P. 217-224. https://doi.org/10.1140/epjst/e2019-900076-1.
Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // In Book “VIII International Scientific Siberian Transport Forum. TransSiberia 2019. Advances in Intelligent Systems and Computing”. Chapter No. 33. Chapter title “Calculation of Tank Car under Quasirandom Cyclic Loading”. 2020. Vol.1115. https://doi.org/10.1007/978-3-030-37916-2_33. – 2020. – Springer Nature Switzerland AG. (Springer, Cham). – Popovic Z., Manakov A., Breskich V. (Eds). – Print ISBN: 978-3-030-37915-5. – Online ISBN: 978-3-030-37916-2.
Vandyshev A.B. A Systematic Analysis of the Parameters of Disk-Type Membrane-Catalytic Devices for Producing High-Purity Hydrogen from Methane and Diesel Fuel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 6-27. DOI: 10.17804/2410-9908.2020.4.06-27.
Mironov V.I. Emelyanov I.G. Vichuzhanin D.I. Zamaraev L.M. Ogorelkov D. A. Yakovlev V.V. Effect of Hydrogenation Temperature and Tensile Stress on the Parameters of the Complete Deformation Diagram for Steel 09G2S [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures.. 2020. Iss. 1. P. 24-33. DOI: 10.17804/2410-9908.2020.1.024-033.
Lezhnin N.V. Makarov A.V. Luchko S.N. The effect of ultrasonic impact-frictional treatment on the surface roughness and hardening of 09Mn2Si constructional steel // Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-310-315. in Russian
Makarov A.V. Korobov Yu.S. Soboleva N.N. Khudorozhkova Yu.V. Vopneruk A.A. Balu P. Barbosa M.M. Malyigina I.Yu. Burov S.V. Stepchenkov A.K. Wear-resistant nickel-based laser clad coatings for high-temperature applications // Letters on Materials. 2019. Vol. 9. No. 4. P. 470-474. https://doi.org/10.22226/2410-3535-2019-4-470-474. in Russian
Makarov A.V. Korshunov L.G. Metallophysical Foundations of Nanostructuring Frictional Treatment of Steels // Physics of Metals and Metallography. 2019. Vol. 120. No. 3. P. 303–311. DOI: 10.1134/S0031918X18120128. in Russian
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Senaeva (Pugacheva) E.I. Malyigina I.Yu. Structure of Fe-Ni-Ti-C-B SHS Copmposites // Physics of Metals and Metallography. 2019. Vol. 120. No. 11. P. 1078-1084. DOI: 10.1134/S0031918X19110139. in Russian
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Goruleva L.S. Makarov A.V. Volkova E.G. Microstructure of a Laser-Welded Joint between a Chromium – Nickel Steel and a Titanium Alloy with a Copper Insert // Physics of Metals and Metallography. 2019. Vol. 120. No. 8. P. 775-781. DOI: 10.1134/S0031918X1908012X. in Russian
Vandyshev A.B. Kulikov V.A. Analysis of Membrane and Membrane-Catalytic Systems for Producing High-Purity Hydrogen from Ammonia // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 43-50. DOI: 10.1007/s10556-019-00581-1. in Russian
Vandyshev A.B. Kulikov V.A. Analysis of the Design Calculation of a Membrane-Catalytic Converterf or Producing High-Purity Hydrogenf rom Biodiesel Fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 3-4. P. 209-215. DOI: 10.1007/s10556-019-00607-8. in Russian
Vandyshev A.B. Kulikov V.A. Analysis of the Efficiency of a Pd/Ag Membrane with a Thickness of 2.25 Microns on a Porous Ceramic Substrate in a laboratory Membrane Reactor // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 31-37. DOI: 10.1007/s10556-019-00592-y. in Russian
Vandyshev A.B. Kulikov V.A. Analysis of the results of testing an individual disk-type membrane-catalytic module for obtaining high-purity hydrogen from methane // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 725-732. DOI: 10.1007/s10556-020-00686-y. in Russian
Vandyshev A.B. Kulikov V.A. Evaluation of design parameters for a 32-module disk-type membrane-catalytic reactor for producing high-purity hydrogen from diesel fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 815-820. DOI: 10.1007/s10556-020-00698-8. in Russian
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of frictional treatment on structure, micromechanical and tribological properties of 03Cr16Ni14Mo3Ti austenitic steel // Metal Science and Heat Treatment. 2019. No. 11-12.
Emelyanov I.G. Mironov V.I. Hodak A.S. The Boundary Value Problem of Determining Hydrogen Concentration and the Stress State in a Titanium Shell // AIP Conference Proceedings. 2019. Vol. 2176. 030005. –https://doi.org/10.1063/1.5135129.
Soboleva N.N. Makarov A.V. Skorynina P.A. Nikolaeva E.P. Malyigina I.Yu. The Effect of Load during Frictional Treatment with a DBN Indenter on the Surface Finish of the NiCrBSi–Cr3C2 Laser Clad Coating // AIP Conference Proceedings. 2019. Vol. 2167. 020345. – https://doi.org/10.1063/1.5132212.
Emelyanov I.G. Thermodiffusion Problem of Determination of the Stress State of a Steel Shell Structure // E3S Web of Conferences. Advances in Intelligent Systems and Computing. Springer. 2019. Vol. 135. 03002. – https://doi.org/10.1051/e3sconf/201913503002.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
Emelyanov I.G. Polyakov A.A. Hodak A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84. in Russian
Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109. in Russian
Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
Shabashov V.A. Gavrilov N.V. Kozlov K.A. Makarov A.V. Titova S.G. Voronin V.I. Structure of the surface layers of metastable austenitic stainless steel nitrided in electron beam plasma // The Physics of Metals and Metallography. 2018. V. 119. – No. 8. – P. 755-763. – DOI: 10.1134/S0031918X18080124.
Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
Lezhnin N.V. Makarov A.V. Gavrilov N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
Makarov A.V. Savrai R.A. Malyigina I.Yu. Volkova E.G. Burov S.V. Nanostructuring and Surface Hardening of Structural Steels by Ultrasonic Impact-Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 020006. – https://doi.org/10.1063/1.5084352.
Makarov A.V. Soboleva N.N. Gibzun M.S. Malyigina I.Yu. Korobov Yu.S. Increasing the Resistance of a NiCrBSi Coating to Heat Wear by Means of Combined Laser Heat Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 030037. – https://doi.org/10.1063/1.5084398.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.
Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004. Full text>>
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011. Full text>>
Makarov A.V. G.V. Samoylova N.V. Gavrilov A.S. Mamayev Osinceva A.L. T.E. Kurennykh Savrai R.A. Effect of Preliminary Nanostructuring Frictional Treatment on the Efficiency of Nitriding of Metastable Austenitic Steel in Electron Beam Plasma // AIP Conf. Proc. 2017. Vol. 1915. – 030011. Full text>>
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2017. Vol. 1915. – 030012. Full text>>
Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050. Full text>>
Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049. Full text>>
Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098. Full text>>
Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098. Full text>>
Vandyshev A.B. Kulikov V.A. Analysis of Parameters and Modes for Producing High-Purity Hydrogen from Natural Gas in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 1-2. P. 49-55.
Vandyshev A.B. Kulikov V.A. Energy and Resource Efficience in Industrial Systems for Production and Use of High-Purity Hydrogen // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 3-4. P. 166-170.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Role of the Strengthening Phases in Abrasive Wear Resistance of Laser-Clad NiCrBSi Coatings // Journal of Friction and Wear. 2017. Vol. 38. – No. 4. P. 272-278.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.
S.D. Neulybin Yu.D. Shchitsyn V.S. Verkhorubov Yu.S. Korobov M.A. Filippov Savrai R.A. Soboleva N.N. Metallurgical Processes During Plasma Remelting of a Metallized Coating of the Fe-C-Cr-Ti-Al System // Metallurgist. 2017. Vol. 60. – Nos. 11–12. P. 1202-1206.
Makarov A.V. N.V. Gavrilov G.V. Samoylova A.S. Mamaev Osinceva A.L. Savrai R.A. Effect of a Continuous and Gas-Cyclic Plasma Nitriding on the Quality of Nanostructured Austenitic Stainless Steel // Obrabotka Metallov – Metal Working and Material Science. 2017. Вып. 2. P. 55-66.
Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Makarov A.V. N.L. Pecherkina Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation // Physics of Metals and Metallography. 2017. Vol. 118. – No. 10. P. 1006-1014.
Makarov A.V. Luchko S.N. Shabashov V.A. Volkova E.G. Zamatovskii A.E. Osinceva A.L. Litvinov A.V. Sagaradze V.V. Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure // Physics of Metals and Metallography. 2017. Vol. 118. – No. 1. P. 52-64.
Makarov A.V. Skorynina P.A. A.S. Yurovskikh Osinceva A.L. Effect of the Conditions of the Nanostructuring Frictional Treatment Process on the Structural and Phase States and the Strengthening of Metastable Austenite Steel // Physics of Metals and Metallography. 2017. Vol. 118. – No. 12. P. 1225-1235.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.
Butorin D.E. Burov V.G. Burov S.V. Tolochko B.I. Bataev I.A. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. V. 60. – Is. 5. P. 817-820.
D.E. Butorin V.G. Burov Burov S.V. B.P. Tolochko I.A. Bataev. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. Vol. 60. – Iss. 5. P. 817-820.
Burov S.V. Khudorozhkova Yu.V. Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. подробнее>>
Makarov A.V. Yakovleva S.P. Volkova E.G. Makharova S.N. Mordovskoy P.G. Special Features of the Formation of the Microstructure of the 09G2S Steel under Conditions of Cold and Warm Equal-Channel Angular Pressing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 39-47.
Makarov A.V. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Lyzhin V.V. Korshunov L.G. Improving the Thermal Stability and Heat Wear Resistance of Carburized Chromium-Nickel Steel by Nanostructuring Frictional Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 49-66.
Vandyshev A.B. Analyzing the Parameters of Membrane Catalytic Systems for Extraction of Highly Pure Hydrogen from Hydrocarbon Feedstock with the Application of Mathematical Modeling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 6-45.
Savrai R.A. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Behavior of Gas Powder Laser Clad NiCrBSi Coatings under Contact Loading // Journal of Materials Engineering and Performance. 2016. Vol. 23. – Is. 3. P. 1068-1075.
Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Investigation of the Structure and Properties of the Material of Various Zones of the Welded Joint of the Austenitic Nitrogen-Containing Steel upon Elastoplastic Deformation // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1153-1163.
Bataev A.A. Burov S.V. Bataev I.A. Burov V.G. Stability Analysis of the Copper Surface Layer Structure in the Process of Sliding Friction by the Method of Diffraction Analysis Using Synchrotron Radiation // Russian Physics Journal. 2016. Vol. 59. – Iss. 2. P. 314-316.
Makarov A.V. Gorkunov E.S. Skorynina P.A. Kogan L.Kh. Yurovskikh A.S. Osinceva A.L. Eddy-Current Control of the Phase Composition and Hardness of Metastable Austenitic Steel after Different Modes of Nanostructuring Attrition Treatment // Russian Journal of Nondestructive Testing. 2016. V. 52. – No. 11. P. 627-637.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.
Khudorozhkova Yu.V. Kamantsev I.S. Burov S.V. The Features of Phase Transformations and Structural Changes in Steels with Stable and Metastable Austenite under Fatigue Loading // AIP Conf. Proc. 2016. Vol. 1785. – 040025. – http://dx.doi.org/10.1063/1.4967082.
Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Savrai R.A. Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2016. Vol. 1785. – 030028. – http://dx.doi.org/10.1063/1.4967049.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Osinceva A.L. The formation of NiCrBSi coatings with increased wear resistance by gas powder laser cladding // Abstracts of International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 21-26 September,. Tomsk: Publishing House of IAO SB RAS, 2015. 336 p.
Emelyanov I.G. Investigation into the Contact Interaction between Shell and Base with Notches // Journal of Machinery Manufacture and Reliability. 2015. Vol. 44. No. 3. P. 263-270.
Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Behavior of Magnetic Characteristics in Promising Nitrogen-Containing Steels upon Elastoplastic Deformation // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 838-849.
Vandyshev A.B. Kulikov V.A. Analysis of parameters of high-purity hydrogen production from methane in a laboratory-scale membrane reformer with an ultrathin palladium membrane // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 3-4. P. 250-256. DOI 10.1007/s10556-015-0032-1.
Vandyshev A.B. Kulikov V.A. Hydrogen Permeability of Palladium Membranes Made of Alloy V-1 in Laboratory Investigations And Membrane Devices // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 5-6. P. 396-401. DOI 10.1007/s10556-015-0058-4.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. Formation of wear-resistant chromium-nickel coating with extra high thermal stability by combined laser-and-heat treatment // Metal Science and Heat Treatment. 2015. V. 57. No. 3-4. P. 161-168.
Makarov A.V. Savrai R.A. Gorkunov E.S. Yurovkikh A.S. Malyigina I.Yu. Davydova (Pozdejeva) N.A. Structure, Mechanical Characteristics, and Deformation and Fracture Features of Quenched Structural Steel under Static and Cyclic Loading after Combined Strain-Heat Nanostructuring Treatment // Physical Mesomechanics. 2015. Vol. 18. No. 1. P. 43-57.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.
Gorkunov E.S. Savrai R.A. Makarov A.V. Zadvorkin S.M. Magnetic techniques for estimating elastic and plastic strains in steels under cyclic loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 6-15.
Makarov A.V. Mitropolskaya S.Yu. Maltseva L.A. Levina A.V. Progress in ultra-deformable stainless steels for medical tool application [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 44-56. URL: http://dream-journal.org/DREAM_Issue_2_2015_Maltseva_L.A._et_al._44_56.pdf.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Tribological Performances of a NiCrBSi – TiC Laser-Clad Composite Coating under Abrasion and Sliding Friction [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 83-97. URL: http://dream-journal.org/issues/2015-3/2015-3_33.html.
Vandyshev A.B. Kulikov V.A. Calculating the main parameters of a Membrane Reformer with a Production Rate of 40 m3/h Designed for Producing Highly Pure Hydrogen from Natural Gas [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 109-121. URL: http://dream-journal.org/issues/2015-3/2015-3_31.html.
Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. Vol. 49, No 9-10. P. 660-667.
Burov S.V. Khudorozhkova Yu.V. The influence of cooling rate on the morphology of cementite in hypereutectoid steel // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 153 p.
Khudorozhkova Yu.V. Burov S.V. Investigation into the structure and properties of wear-resistant coatings based on chromium metastable austenite // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 154 p.
Gorkunov E.S. Taratorkin A.I. Makarov A.V. Magnetic techniques for estimating elastic and plastic strains in steels under cycliс loading // Chapter in book Advanced Dynamics and Model Based Control of Structures and Machines / Eds. A.K. Belyaev, Hans Irschik, Michael Krommer: – , 2014, XVIII, 316 p. Springer, 2014. Chapter 15. P. 137-144.
Emelyanov I.G. Kuznetsov A.V. The Stressed State of Shell Structures under Local Loads // Journal of Machinery and Reliability. 2014. Vol. 43. No 1. P. 42-47.
Emelyanov I.G. Kuznetsov A.V. The stressed state of shell structures under local loads // Journal of Machinery Manufacture and Reliability. 2014. V. 43. – No. 1. P. 42-47.
Vandyshev A.B. Kulikov V.A. Comparison of calculated and experimental flow data for a membrane reformer for special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 9-10. P. 660-667.
Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 11-12. P. 719-726.
Makarov A.V. Korshunov L.G. Taratorkin A.I. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Chernenko N.L. Influence of Prolonged Heating on Thermal Softening, Chemical Composition, and Evolution of the Nanocrystalline Structure Formed in Quenched High-Carbon Steel upon Friction Treatment // The Physics of Metals and Metallography. 2014. V. 115. No. 3. P. 303-314.
Emelyanov I.G. Mironov V.I. Contact problem for a shell considering the transverse load // Journal of Machinery Manufacture and Reliability. 2013. V. 42. Is. 1. P. 36-40.
Khudorozhkova Yu.V. Burov S.V. Korobov Yu.S. Devyatyarov M.S. Effect of Nickel on Structure of Cu–Cr–Zr Bronze after Annealing at 800 and 900 °С // Modern materials and technologies. 2013. №1. P. 117-120.
Ivanov M. Smirnov S.V. Pavlyishko S.V. Ivanov D. Brenner D. Shenderova O. Tribological Properties of Motor Oil with Nanodiamond Additive Tested for Steel Friction Surfaces with Different Hardnesses // MRS Online Proceedings Library. 2013. Vol. 6038. P. 1-6.
Kuznetsov V.P. Smolin I.Yu. Dmitriev A.I. Konovalov D.I. Makarov A.V. et al. Finite Element Simulation of Nanostructuring Burnishing // Physical Mesomechanics. 2013. Vol. 16. – № 1. P. 62-72.
Makarov A.V. Gorkunov E.S. Taratorkin A.I. Kogan L.Kh. Yurovskikh A.S. Kolobyilin Yu.M. Malyigina I.Yu. Davydova (Pozdejeva) N.A. The Influence of a Combined Strain–Heat Treatment on the Features of Electromagnetic Testing of Fatigue Degradation of Quenched Constructional Steel // Russian Journal of Nondestructive Testing. 2013. Vol. 49. – № 12. P. 690-704.
Barashkova E.A. Emelyanov I.G. Determination of the Stress State of Shells under Local Load // MATHEMATICAL METHODS and OPTIMIZATION TECHNIQUES in ENGINEERING. Proceedings of the 1st International Conference on Optimization Techniques in Engineering (OTENG '13), Antalya, Turkey, October 8-10. 2013. P. 109-113.
Vandyshev A.B. Kulikov V.A. Extraction of extra pure hydrogen from methan steam conversion products in membrane equipment, combined simultaneously with two CO and CH4 conversion catalysts // Chemical and Petroleum Engineering. 2012. Vol. 47, No 11-12 (march). P. 831-836.
Yana Lizunkova Burov S.V. Thomas Hassel Marten Sebastian Bierbaum Friedich-Wilhelm Bach Temperature control during the APN-process on the steel 1.3343 // Engineering Materials. 2012. Vol. 504-506. P. 1017-1022.
Ivanov M.G. Ivanov D.M. Pavlyishko S.V. Petrov I. Vargas A. mCguire G. Shenderova O. Nanodiamond-Based Nanolubricants // Fullerenes, Nanotubes and Carbon Nanostructures. 2012. Vol. 20. Issue 4-7. P. 606-610.
Makarov A.V. Pozdejeva N.A. Taratorkin A.I. et al. Improvement of wear resistance of quenched structural steel by nanostructuring frictional treatment // Journal of Friction and Wear. 2012. Vol. 33. – Issue: 6. P. 433-442.
Gorbunova T.I. Pervova M.G. Trushina E.B. Pavlyishko S.V. Zapevalov A.Ya. Saloutin V.I. A New Application of Derivatives of Polychlorobiphenyls and Polyethylene Glycols // Russian Journal of Applied Chemistry. 2012. Vol. 85. No 10. P. 1632-1636.
Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. Magnetic and eddy-current testing of hardened constructional steel subjected to combined strain-thermal treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 12. P. 673-685.
Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. The peculiarities of magnetic and eddy-current testing of quenched structural steel hardened by nanostructuring frictional treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 11. P. 615-622.
Barashkova E. Emelyanov I.G. Stress State of Shells under Arbitrary Load // In Proceedings of 5th WSEAS International Conference on Finite Differences - Finite Elements – Finite Volumes - Boundary Elements (F-and-B'12), Prague, Czech Republic, September 24-26. 2012. P. 33-37.
Ivanov M. Ivanov D. Pavlyishko S.V. Koscheev A. Shenderova O. A. Nanodiamond-based Nanolubricants: polyester oil based formulations // MRS Proceedings, 1452, mrss 12-1452-ff08-05, doi:10.1557/opl.2012.1228. 2012. http://journals.cambridge.org/abstract_S1946427412012286.
Makarov A.V. Schastlivtsev V.M. Tabatchikova T.I. Osinceva A.L. Yakovleva I.L. Egorova L.Yu. Effect of silicon on the wear resistance of high-carbon steels with the structures of isothermal decomposition of austenite during friction and abrasive action // Russian Metallurgy (Metally). 2011. No. 4. P. 296–302.
Vandyshev A.B. Kulikov V.A. Evaluation of the efficiency of preparing especially pure hydrogen from methanol and ethanol in membrane equipment, combined with a methane or carbon monoxide conversion catalyst // Chemical and Petroleum Engineering. 2011. Vol. 47, Nos. 7-8. P. 536-544.
Gorkunov E.S. Mitropolskaya S.Yu. Groznaya E.M. Osinceva A.L. Mushnikov A.N. Effect of elastoplastic loading on magnetic properties of steel 20 after gas carburasing // Russian Journal of Nondestructive Testing. 2011. No. 4. P. 3–16.
Busko V.N. Vengrinovich V.L. Dovgyallo A.G. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. To the problem of non destructive diagnostics of steеl surface layers nano-structured by attrition // Abstr. International Conference ”Optical Techniques and Nano-Tools for Material and Life Sciences ”, Minsk, Belarus, June 15-19, 2010. Minsk, Belarus, 2010. P.1.
Makarov A.V. Gorkunov E.S. Malyigina I.Yu. Kogan L.Kh. Savrai R.A. Eddy current testing of quality of chrome-nickel produced during gas-powder laser cladding and subsequent stabilizing annealing // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 1. 2nd edition. –. M.: Publishing house Spektr, 2010. 108 p.
Gorkunov E.S. Makarov A.V. Zadvorkin S.M. Rashev Ts. Osinceva A.L. Mitropolskaya S.Yu. Savrai R.A. Solov’ev K.E. Testing of phase composition, hardness and wear resistance of high-cromium steels with nitrogen and carbon content by electromagnetic methods // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 266-267.
Makarov A.V. Gorkunov E.S. Kogan L.Kh. Korshunov L.G. Malyigina I.Yu. Osinceva A.L. Kolobyilin Yu.M. Eddy-current testing of laser hardened cemented chrome-nickel steel for drilling bits // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 267-268.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluation of the life of a shell construction lying on supports // Journal of Machinery Manufacture and Reliability. 2010. V. 39. Is. 1. P. 83-88.
Vandyshev A.B. Kulikov V.A. Major ways of enhancing efficiency and economy of membrane method of special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2010. Volume 46, Numbers 11-12. P. 726-733.
Vandyshev A.B. Kulikov V.A. Nikishin S.N. Analysis of flow-rate characteristics of high-output membrane equipment for the production of ultra-pure hydrogen // Chemical and Petroleum Engineering. 2010. Volume 46, Numbers 1-2. P. 72-78.
Makarov A.V. Taratorkin A.I. Davydova (Pozdejeva) N.A. Smirnov S.V. Vichuzhanin D.I. Korshunov L.G. Malyigina I.Yu. Effect of hardening friction treatment with hard-alloy indenter on microstructure, mechanical properties, and deformation and fracture features of constructional steel under static and cyclic tension // Surface and Coatings Technology. 2010. V. 205 Is. 3. P. 841-852.
Makarov A.V. Gorkunov E.S. Malyigina I.Yu. Kogan L.Kh. Taratorkin A.I. Eddy current quality control of nickel-chromium coatings forming in the process of gas-powder laser cladding and subsequent stabilizing annealing // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 1.2.23. 2010. 8 p.
Gorkunov E.S. Makarov A.V. Zadvorkin S.M. Rashev Ts. Osinceva A.L. Mitropolskaya S.Yu. Taratorkin A.I. Solov’ev K.E. Electromagnetic testing of phase composition, hardness and wear resistance on nitrogen- and carbon-containing high-cromium steels // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 4.2.13. 2010. 6 p.
Makarov A.V. Gorkunov E.S. Kogan L.Kh. Korshunov L.G. Malyigina I.Yu. Osinceva A.L. Kolobyilin Yu.M. Eddy-current testing of laser hardened cement chromonickel steel for drilling bits // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 4.2.14. 2010. 11 p.
Vandyshev A.B. Kulikov V.A. Nikishin S.N. Raising efficiency of special-purity hydrogen production from nitrogen-hydrogen gas mixtures // Chemical and Petroleum Engineering. 2009. Volume 45, Numbers 5-6. P. 360-363.
Gorkunov E.S. Mitropolskaya S.Yu. Osinceva A.L. Vichuzhanin D.I. Magnetic investigation of strains and stresses in surface-hardened materials // Physical Mesomechanics. 2009. V.12. №2. P. 95-104.
Burov S.V. Bataev A.A. Khudorozhkova Yu.V. Tyurin A.G. Burov V.G. Tolochko B.P. Sharafutdinov M.R. In situ structural analysis of metals surface during friction using diffractometry of synchrotron radiation // Proceedings of third intern. forum on strategic technologies, Novosibirsk-Tomsk, June 23-29. 2008. P. 27-31.
Khudorozhkova Yu.V. Burov S.V. Choice of austenitization regimes for roll steel with 5 % of Chromium // Proceedings of third intern. forum on strategic technologies, Novosibirsk-Tomsk, June 23-29. 2008. P. 41-44.
Vandyshev A.B. Kulikov V.A. Nikishin S.N. Raising efficiency of super-pure hydrogen production from natural gas // Chemical and Petroleum Engineering. 2008. Volume 44, Numbers 7-8. P. 382-386.
Gorkunov E.S. Emelyanov I.G. Mitropolskaya S.Yu. DETERMINING THE STRESS STATE OF A STRETCHED ROD FROM ITS MEASURED MAGNETIC CHARACTERISTICS // Journal of Applied Mechanics and Technical Physics. 2008. Vol. 49, No. 5. P. 877–882.
Gorkunov E.S. Zadvorkin S.M. Emelyanov I.G. Mitropolskaya S.Yu. Model of the state of stress in a bilayer steel workpiece during uniaxial tension // Russian Metallurgy (Metally). 2007. Is. 1. P. 65-68.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determining the stress state and the lifetime of a shell structure load // Journal of Machinery Manufacture and Reliability. 2007. V. 36. Is. 5. P. 443-449.
Gorkunov E.S. Zadvorkin S.M. Emelyanov I.G. Mitropolskaya S.Yu. Variation of magnetic properties of two-layer carbon-steel products under tension // Physics of Metals and Metallography. 2007. V. 103. Is. 6. P. 624-632.
Vandyshev A.B. Kulikov V.A. Murav’ev L. L. Nikishin S. N. Ozone disinfection of water for bathing pools of recirculation type // Chemical and Petroleum Engineering. 2007. Volume 43, Numbers 1-2. P. 108-112.
Vandyshev A.B. Kulikov V.A. Nikishin S.N. Increase in the efficiency of preparing specially pure hydrogen from methane in a high-temperature converter-membrane equipment system // Chemical and Petroleum Engineering. 2007. Volume 43, Numbers 11-12. P. 660-666.
Gorkunov E.S. Makarov A.V. Rogovaya S.A. Savrai R.A. Smirnov S.V. Zadvorkin S.M. The Use of Magnetic Methods for the Estimation of Plastic Deformation under Cyclic Loading of Annealed Medium-Carbon Steel // In: Abstr. of the 9th European Conference for Non-Destructive Testing, Part 2, Germany, Berlin, September 25-29. 2006. 86 p.
Vandyshev A.B. Kulikov V.A. Kirnos I. V. Nikishin S.N. High-temperature membrane apparatuses in systems for repeated utilization of hydrogen // Chemical and Petroleum Engineering. 2006. Volume 42, Numbers 11-12. P. 640-644.
Gorkunov E.S. Makarov A.V. Rogovaya S.A. Taratorkin A.I. Smirnov S.V. Zadvorkin S.M. The Use of Magnetic Methods for the Estimation of Plastic Deformation under Cyclic Loading of Annealed Medium-Carbon Steel // In: DGZfP Proc. BB 103-CD ISBN 3-931381-86-2 of the 9th European Conference for Non-Destructive Testing, Part 2, Germany, Berlin, September 25-29. 2006. 86 p.
Burov S.V. Studying evolution of the structure of superficial layers GZM and OZM metals at friction using diffractometry of syncrotron radiation // "Modern technique and technologies MTT`2005", proceedings of the 11th international scientific and practical conf. Tomsk, 2005. P. 115-116.
Emelyanov I.G. Efimov V.P. Kuznetsov A.V. MODEL OF STRESSED DEFORMED STATE OF THE TANK CAR BOILER WITH IMPROVEDSYSTEM OF BEARING ON THE FRAME // Tyazheloe Mashinostroenie. 2005. V. 8. 44 p.
Gorkunov E.S. Tsar'kova T. P. Smirnov S.V. Vichuzhanin D.I. Emelyanov I.G. Kuznetsov V. Yu. Effect of Deviation from Coaxiality between the Directions of Magnetization and Mechanical Strain on the Results of Magnetic Testing of Elastic Strain in Steels // Russian Journal of Nondestructive Testing.- May. 2004. Volume 40, Issue 5. P. 317-325.
Emelyanov I.G. Kuznetsov V.U. Contact problem for thin-walled shell Proceedings of the 11th World Congress in Mechanism and Machine Science. April 1 – 4, 2004, Tianjin, China. 2004. P. 353 - 357.
Murav'ev L. L. Vandyshev A.B. Model for Processing and Analysis of Stationary Hydrogen-Permeability Isotherms of Palladium Alloy Membranes // Chemical and Petroleum Engineering. 2003. Volume 39, Numbers 9-10. P. 571-576.
Vasilenko A.T. Emelyanov I.G. Investigation of a Stressed State of Shells of Revolution Contacting with Bodies under the Action of Pulsating Loads // Journal of Mathematical Sciences. 2002. 109. №1. P. 1229-1234.
Vandyshev A.B. Murav'ev L. L. and Timofeev N. I. Determination of Effective Hydrogen Permeability from Performance Characteristics of High-Temperature Membrane Equipment // Chemical and Petroleum Engineering. 2002. Volume 38, Numbers 11-12. P. 641-646.
Pyshmintsev I.Yu. De Meyer M. De Cooman B.C. Savrai R.A. Shveykin V.P. Vermeulen M. The influence of the stress state on the plasticity of Transformation induced plasticity – aided steel // Metallurgical and materials transactions A. 2002. A, June, Vol. 33A. P. 1659-1667.
Pychmintsev I.Yu. Savrai R.A. De Cooman B.C. Effect of stress state on the transformation behaviour and mechanical properties of TRIP-aided automotive steels // International conference on TRIP-aided high strength ferrous alloys, GRIPS’ sparkling world of steel Vol. 1: Proceedings. 2002. P. 79-84.
Pychmintsev I.Yu. Savrai R.A. De Cooman B.C. Moriau O. High strain rate behaviour of TRIP-aided automotive steels // International conference on TRIP-aided high strength ferrous alloys, GRIPS’ sparkling world of steel Vol. 1: Proceedings. 2002. P. 299-302.
Dmitry Suhanov Burov S.V. Condition of conservation of layered structure of multilayer steels at high temperature treatment // Proceedings of the 5th Korea – Russia international symposium on science and technology. Vol.2.- Tomsk. 2001. P. 270-272.
Vasilenko A. T. Emelyanov I.G. Kuznetsov V. Yu. Stress Analysis of Laminated Shells of Revolution with an Imperfect Interlayer Contact // International Applied Mechanics. May. 2001. Volume 37, Issue 5. P. 662-669.
Vasilenko A. T. Emelyanov I.G. Thermal Stressed State of a Box-Shaped Crucible // Strength of Materials. March. 2001. Volume 33, Issue 2. P. 165-170.
Murav'ev L. L. Makarov V.M. Vandyshev A.B. Effect of Composition of Initial Gas Mixture on Membrane Extraction of Super-Pure Hydrogen // Chemical and Petroleum Engineering. 2001. Volume 37, Numbers 9-10. P. 493-498.
Vandyshev A.B. Murav'ev L.L. Makarov V.M. Analysis of Process Flow Diagrams of Membrane Units for the Production of Extra-Pure Hydrogen from Natural Gas // Chemical and Petroleum Engineering. 2001. Volume 37, Numbers 5-6. P. 315-320.
Vandyshev A.B. Murav`ev L.L. Veselov I.N. Timofeev N.I. The analysis of a series simple technological schemes for ultra-pure hydrogen production // Proceedings of the 13th World Hydrogen Energy Conference, Beijing, China, 10-15 June. 2000. v.1. P. 213- 217.
Dmitry Suhanov Larisa Suhanova Burov S.V. Fracture of laminated steels at the dynamic loading // Proceedings of the 4th Korea – Russia international symposium on science and technology. Part.3.- Ulsan. 2000. P. 342-345.
Veselov I. Emelyanov I.G. Fedotov V.P. Research of the Tension of the Shell Working in Hydrogen-Containing Environment // Proceedings of the 13th World Hydrogen Energy Conference, Beijing, China, June 12-15. 2000. P. 1041-1045.
Makarov V.M. Kulikov V.A. Vandyshev A.B. Investigation of the process of continuous production of solid caustic soda in “sharp” jet apparatus // Chemical and Petroleum Engineering. 1999. Volume 35, Number 3. P. 142-146.
Vandyshev A.B. Murav'ev L. L. Makarov V.M. Usova T. B. Modeling of the membrane extraction of extra-pure hydrogen from chemically noninteracting multicomponent gaseous mixtures // Chemical and Petroleum Engineering. 1999. Volume 35, Number 1. P. 3-8.
Vasilenko A.T. Emelyanov I.G. ’’Determination of the Stressed State of Three-Layer Cylindrical Shells with Allowance for Layer Separation’’, Int. Appl. Mech., 35, No.5. 1999. P. 501-507.
Kulikov V.A. Vandyshev A.B. Makarov V.M. Study of the operation and method of calculating the injector for feeding a “Strong” gas-liquid jet // Chemical and Petroleum Engineering. 1998. Volume 34, Numbers 9-10. P. 547-550.
Baryshnikov V. V. Bukin V. V. Vandyshev A.B. Komarskikh A. V. Kulikov V.A. Apparatus for ozone treatment of circulating water // Chemical and Petroleum Engineering. 1997. Volume 33, Number 6. P. 699-702.
Emelyanov I.G. ’’Contact Interaction of Shells of Revolution in Unknown Two- Dimensional Regions’’, Int. Appl. Mech., 33, No7. 1997. P. 548-555.
Emelyanov I.G. A study of contact interaction of two-layer shells // Journal of Applied Mechanics and Technical Physics. January–February. 1996. Volume 37, Issue 1. P. 129-134.
Makarov V.M. Veselov I.N. Vandyshev A.B. Timofeev N.I. Results of basic and applied research in hydrogen membrane technology // Chemical and Petroleum Engineering. 1996. Vol. 32, No. 5. P. 399-402.
Baryshnikov V. V. Bukin V. V. Vandyshev A.B. Makarov V.M. Mozgovoi V. F. Chemical engineering in solution of ecological problems // Chemical and Petroleum Engineering. 1995. Volume 31, Number 10. P. 570-573.
Murav'ev L. L. Vandyshev A.B. Makarov V.M. Effect of recirculation on the membrane extraction of hydrogen from products of the steam conversion of methane // Chemical and Petroleum Engineering. 1994. Volume 36, Number 8. P. 480-484.
Vandyshev A.B. Murav'ev L.L. Makarov V.M. Usova T. B. Effects of reactions in the C−H−O system on the membrane extraction of especial-purity hydrogen // Chemical and Petroleum Engineering. 1994. Vol. 36, No. 1. P. 8-15.
Vasilenko A. T. Emelyanov I.G. Contact interaction of anisotropic cylindrical shells with elastic and rigid bodies // International Applied Mechanics March. 1993. Volume 29, Issue 3. P. 200-203.
Vandyshev A.B. Garenskikh V. A. Koshkin I. G. Makarov V.M. Nikishin S.N. Serov P. G. Svirikina T. E. Sokolov I. L. Tabachnik E. B. Experimental UEM OChV-10 membrane apparatus for investigation of the problem of the production of superpure hydrogen // Chemical and Petroleum Engineering. 1992. Vol. 28, No. 12. P. 706-709.
Vasilenko A.T. Emelyanov I.G. On Approach to Solving the Problem of the Contact of a Cylindrical Shell with a Rigid Body // Soviet Appl. Mech. 1990. 26, N5. P. 454-500.
Emelyanov I.G. Numerical analysis of contact interaction of cylindrical shells // Soviet Appl. Mech. 1987. 23, No 6. P. 569-573.
