FEDERAL AGENCY FOR SCIENTIFIC ORGANIZATIONS

    FEDERAL STATE BUDGETARY SCIENTIFIC INSTITUTION
    INSTITUTE OF ENGINEERING SCIENCE, URAL BRANCH OF THE RUSSIAN ACADEMY OF SCIENCES

INTERNATIONAL CONFERENCE

MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES

PARTICIPANT POSTERS            

1. Agapitova O. Yu., Byvaltsev S. V. and Zalazinsky A. G. Mathematical Modeling of Hydromechanical Extrusion
   
   
2. Baronin G. S., Buznik V. M., Dmitriev O. S., Zavrazhina Ñ. V., Mishchenko S. V., Zavrazhin D. O. and Khudyakov V. V. Structure and Properties of Fluoroplastic Modified with Titanium Nanoparticles
   
   
3. Baronin G. S., Buznik V. M., Dmitriev O. S., Zavrazhina Ñ. V., Mishchenko S. V., Zavrazhin D. O. and Khudyakov V. V. Thermophysical Properties of Fluoropolymer Composites with Cobalt Nanoparticles
   
   
4. Burenina O.N. and Savvinova M. E. Sources of Mineral Raw Materials for the Production ofBuilding Materials of the Republic of Sakha (Yakutia)
   
   
5. Burmasheva N. V. and Prosviryakov E. Yu. Exact Solution for the Layered Convection of a Viscous Incompressible Fluid at Specified Temperature Gradients and Tangential Forces on theFree Boundary
   
   
6. Burov A. E. , Lepikhin A. M. and Moskvichev V. V. Strength and Reliability Analysis of Metal-Composite Overwrapped Pressure Vessel
   
   
7. Doletskaya L. I., Solopov R. V., Kavchenkov V. P. and Andreenkov E. S. Analyzing the Reliability of Mechanical Parts in 10 kV Aerial Transmission Lines under Ice-Coating and WindEffects in View of Their Design Features
   
   
8. Doronin S.V. Projections of Limiting States for Load-Bearing Structures of Reflectors Made ofPolymer Composites
   
   
9. Doronin S. V., Reizmunt E. M. and Filippova Yu. F. Design Evaluation of Safety Factors for Reflector Skeleton Made of Polymer Composites
   
   
10. Drukarenko N. A., Kamantsev I. S., Kuznetsov A. V., Vladimirov A. P. and Khudorozhkova Yu. V. Numerical and Experimental Approaches to the Evaluation of theFatigue Life of a Cylindrical Specimen made of the 09G2S Steel
    
    
11. Emelyanov I. G., Mironov V. I. and Kuznetsov A. V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision
    
    
12. Eremina G. M. and Smolin A. Yu. Numerical Study of the Influence of the Thickness and Roughness of TiN Coatings on Their Wear in Scratch Testing
    
    
13. Fedorov Yu. Yu., Popov S. N., Savvina A. V., Vasilyev S. V. and Rodionov A. K. A Simplified Method to Determine Resistance to Rapid Crack Propagation in Polyethylene Pipes
    
    
14. Fedotov A. I., Kuznetsov N. Y., Lysenko A. V. and Vlasov V. G. Car Suspension SystemMonitoring under Road Conditions
    
    
15. Filin S. A., Rogalin V. E. and Kaplunov I. A. Improving Resource of Metal Mirrors for Powerful Lasers
    
    
16. Filin S. A., Rogalin V. E., Kaplunov I. A. and Zingerman K. M. Physical-Chemical Purification of Power Metal Optics for Increasing Its Service Life
    
    
17. Gorkunov E. S., Povolotskaya A. M. and Zadvorkin S. M. Differential Evaluation of the Magnetic State of Wire Packages
    
    
18. Gorkunov E. S., Yakushenko E. I., Zadvorkin S. M. and Mushnikov A. N. Analytical Description of Changes in the Magnetic States of Chromium-Nickel Steel under Uniaxial Elastic Deformation
    
    
19. Gorshkov A. V. and Prosviryakov E. Yu. Complex Large-Scale Convection of a Viscous Incompressible Fluid with Heat Exchange According to Newton’s Law
    
    
20. Gorshkov A. V. and Prosviryakov E. Yu. Convective Flow in the Solid Rotation of a Viscous Incompressible Fluid
    
    
21. Illarionov A. G., Stepanov S. I. and Demakov S. L. Fracture Surface Analysis of a Quenched (a+b)-Metastable Titanium Alloy
    
    
22. Kanyukov S. I., Konovalov A. V. and Muizemnek O. Yu. Intersubjective Decision-Making for Computer-Aided Forging Technology Design
    
    
23. Khalevitsky Yu. V., Konovalov A. V., Burmasheva N. V. and Partin A. S. Linear Solver Performance in Elastoplastic Problem Solution on GPU Cluster
    
    
24. Kislyakov M. A., Chernov V. A., Maksimkin V. L. and Bozhin Yu. M. Features of Electromagnetic Processes in Electric Gas Turbine Installations
    
    
25. Kislyakov M. A., Chernov V. A., Maksimkin V. L. and Bozhin Yu. M. Ideology of a Multiparametric System for Estimating the Insulation System of Electric Machines on the Basis of Absorption Testing Methods
    
    
26. Kondakov A. S. Thermal Calculation in Branch Pipe Cavity of Fire Hydrant in Conditions of Far North
    
    
27. Koroleva L. F. Abrasive Properties of Modified Oxides for Finish Polishing of Steel
    
    
28. Kryuchkov D. I. and Zalazinsky A. G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials
    
    
29. Kryuchkov D. I., Berezin I. M., Nesterenko A. V., Zalazinsky A. G. and Vichuzhanin D. I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method
    
    
30. Kuznetsov A. V., Kamantsev I. S., Zadvorkin S. M., Drukarenko N. A., Goruleva L. S. and Veselova V. E. Evaluating the Damage of Steel 09G2S under Static and Cyclic Loading with Regard for the Level of Residual Stresses in the Metal
    
    
31. Kuznetsov N. Yu., Fedotov A. I. and Vlasov V. G. Test Benches for Studying the Properties of Car Tyres
    
    
32. Loginov Yu. N., Pervukhin A. E., Babailov N. A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing
    
    
33. Loginov Yu. N. and Puzanov M. P. Finite Element Modeling of the Upsetting of an Anisotropic Cylindrical Workpiece
    
    
34. Loginov Yu. N., Babailov N. A. and Polyansky L. I. The Properties of Coke Breeze Briquettes Produced by Ram Briquetting
    
    
35. Lozhkomoev A. S., Kazantsev S. O. and Glazkova E. A. Synthesis and Adsorption Properties of Hollow Tubular Alumina Fibers
    
    
36. Lyamets L. L., Yakimenko I. V., Kanishchev O. A. and Bliznyuk O. A. Small Sample Estimation of the Reliability Function for Technical Products
    
    
37. Maisuradze M. V. and Ryzhkov M. A. The Dependency of Mechanical Properties on the Microstructure Anisotropy Index of Some Alloyed Steels
    
    
38. Malikov V. N., Dmitriev S. F., Katasonov A. O., Sagalakov A. M. and Ishkov A. V. Subminiature Eddy-Current Transducers Designed to Study Welded Joints of Titanium Alloys
    
    
39. Mironov V. I., Lukashuk O. A. and Ogorelkov D. A. Estimation of Metallic Structure Durability for a Known Law of Stress Variation
    
    
40. Mishchenko S. V., Zavrazhin D. O., Zavrazhina Ñ. V. and Tugolukov Å. N. Numerical Simulation of the Temperature Field and Microwave Absorption by Carbon Nanotubes and Polymer Composites
    
    
41. Moskvichev E. V. and Khakhlenkova A. A. Analyzing the Surface Accuracy of a RigidReflector under Mechanical and Thermal Loading
    
    
42. Nikolaeva L. A. and Burenina O. N. Justification of Rational Parameters of Briquetting UsingMechanic Activation Techniques
    
    
43. Ovchinnikov N. P., Portnyagina V. V. and Sobakina M. P. Dependence of the Mean Time to Failure of a Hydraulic Balancing Machine Unit on Different Factors for Sectional Pumps of the Alrosa JSC
    
    
44. Panin S. V., Vlasov I. V., Maruschak P. O., Moiseenko D. D., Berto F. and Vinogradov A. Influence of Stress Concentrator Shape and Testing Temperature on Impact Bending Fracture of17Mn1Si Pipe Steel
    
    
45. Aleksandr Pervikov, Nikolay Rodkevich, Elena Glazkova and Marat Lerner Bimodal Metal Micro-Nanopowders for Powder Injection Molding
    
    
46. Petrova P. N., Gogoleva O. V. and Mayer A. F. Influence of Ultrasound and Discrete Basalt Fibers on the Properties of Ultrahigh Molecular Weight Polyethylene
    
    
47. Prosviryakov E. Yu. and Spevak L. F. Simulation of a Viscous Flow in Layered Composites in View of the Thermocapillary Effect
    
    
48. Pyshmintsev I. Yu., Bityukov S. M., Pastukhov V. I., Danilov S. V., Vedernikova L. O. and Lobanov M. L. Evolution of Microstructure in Stainless Martensitic Steel for Seamless Tubing
    
    
49. Savrai R. A., Makarov A. V., Gorkunov E. S., Soboleva N. N., Kogan L. Kh., Malygina I. Yu., Osintseva A. L. and Davydova N. A. Eddy-Current Testing of Fatigue Degradation upon Contact Fatigue Loading of Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating
    
    
50. Savrai R. A. and Kuznetsov A. V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch
    
    
51. Shalimov A. S. and Tashkinov M. A. An X-FEM Model of Crack Propagation in the Matrix of Randomly Reinforced Heterogeneous Media
    
    
52. Shipacheva E. N., Petunin A. A. and Berezin I. M. A Genetic Algorithm Used for Solving One Optimization Problem
    
    
53. Solovei V. D. and Kolmogorov V. L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory
    
    
54. Spevak L. F. and Kazakov A. L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method
    
    
55. Spevak L. F. and Nefedova O. A. Solving a Two-Dimensional Nonlinear Heat ConductionEquation with Nonzero Boundary Conditions by the Boundary Element Method
    
    
56. Starostin N. P. and Vasilieva M. A. Technological Parameters of Welding of Branch Saddles to Polyethylene Pipes at Low Temperatures
    
    
57. Starostin N. P. and Ammosova O. A. Calculation of the Technological Parameters of Electrofusion Welding of Polyethylene Pipes at Low Temperatures
    
    
58. Stepanova L. V. The Generalized Fracture Criteria Based On the Multi-parameter Representation of the Crack Tip Stress Field
    
    
59. Stepanova L. V. Modeling of Crack Growth under Mixed-Mode Loading by a Molecular Dynamics Method and a Linear Fracture Mechanics Approach
    
    
60. Taratorkin I. A., Derzhansky V. B. and Taratorkin A. I. Methods for Predicting Dynamic Loading of Friction Disks
    
    
61. Tikhonov R. S. and Starostin N. P. Experimental Evaluation of the Efficiency of Thermal Diagnostics of Friction in a Sliding Bearing System with Regard for Shaft Rotation Speed
    
    
62. Volkov S. S., Struzhanov V. V. Fatigue Durability under Random Cyclic Loading
    
    
63. Voronin and Chaplygin K. K. Finite Element Analysis of the Upsetting of a 5056 Aluminum Alloy Sample with Consideration of Its Microstructure
    
    
64. Voronin S. V. and Loboda P. S. Methods for Producing Foamed Aluminum
    
    
65. Yepin V. V., Tsvetkov R. V., Shardakov I. N. and Shestakov A. P. Investigation of Natural Oscillations of a Viscous Liquid in an Elastic Tube
    
    
66. Zalazinskaya E. A.and Zalazinsky A. G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body
    
    
67. Zalazinsky A. G., Kryuchkov D. I., Nesterenko A. V. and Titov V. G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite Blanks
    
    
68. Zamaraev L. M. and Smirnov S. V. High-Temperature Short-Term Creep of the Grade 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium
    
    
69. Zlobina I. V., Bekrenev N. V. and Muldasheva G. K. Influence of the Microwave Electromagnetic Field on the Micro- and Nanostructure of Reinforcing Topological Structures Based on Carbon Fibers
    
    
70. Sidashov A. V. and Kolesnikov I. V. Nonequilibrium Processes of Segregation and Diffusion in Metal-Polymer Tribosystems
    
    
71. Pugacheva N. B., Khudorozhkova Yu. V. and Derevyankin E. V. EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation
    
    
72. Berezin I. M., Polyakov A. P. and Polyakov P. A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion
    
    
73. Gorkunov E.S., Zadvorkin S.M. and Goruleva L.S. Specific Features of the Determination of Residual Stresses in Materials by Diffraction Techniques
    
    
74. Semenov A. A. Stability of Cylindrical Shell Panels of Modern Materials under Dynamic Loading
    
    
75. Loginov Yu. N., Golodnov A. I., Stepanov S. I. and Kovalev E. Yu. Determining the Young’s Modulus of a Cellular Titanium Implant by FEM Simulation
    
    
76. Alekseeva E. L., Belyaev A. K., Pasmanik L. A., Polyanskiy A. M., Polyanskiy V. A., Tretiakov D. A. and Yakovlev Yu. A. A Study of Hydrogen Cracking in Metals by the Acoustoelasticity Method
    
    
77. Kazantsev S. O. Study of Surface Acid-Base Characteristics of Aluminum Hydroxide Nanostructures
    
    
78. Korolev A. P., Makarchuk M. V., Dutov M. N. and Loskutova A. D. A Methodology for Investigating Short-Range Fields of Cluster Nanostructures
    
    
79. Panin S. V., Kornienko L. A., Nguyen Duc Anh, Alexenko V. O., and Ivanova L. R. Enhancement of Mechanical and Tribotechnical Properties of Polymer Composites with Thermoplastic UHMWPE and PEEK Matrices by Loading Carbon Nanofibers/Nanotubes
    
    
80. Panin S. V., Kornienko L. A., Huang Qitao, Alexenko V. O. and Ivanova L. R. Functionalization of Powder and Fibrous Microfillers for UHMWPE by Treatment with Polyorganosiloxane
    
    
81. Panin S. V., Kornienko L. A., Buslovich D. G., Alexenko V. O. and Ivanova L. R. Influence of Load and Sliding Velocity on Wear Resistance of Solid-Lubricant Composites of Ultra-High Molecular Weight Polyethylene
    
    
82. Rogozhin M., Rogalin V., Krymsky M. and Kaplunov I. On the Possibility of Increasing the Resource of High Power Laser Optics by Using Two-Component Output Windows
    
    
83. Eftifeeva etc.
    
    
84. Akimova etc.
    
    
85. Kurmoyartzeva etc.
    
    
86. Trusov etc.
    
    
87. Serovaev etc.
    
    
88. Dementiev etc.
    
    
89. Gribov etc.
    
    
90. Yants etc.
    
    

Questions are welcome  by phone at +7 343 3753583 or by e-mail at conf_mrdmk@imach.uran.ru