2008 2010 2012 2014 2015 2016 2017 Eng

      
      

 ,   

 

 

 

 

 

            

  1. Agapitova O. Yu., Byvaltsev S. V. and Zalazinsky A. G. Mathematical Modeling of Hydromechanical Extrusion

  2. Baronin G. S., Buznik V. M., Dmitriev O. S., Zavrazhina . V., Mishchenko S. V., Zavrazhin D. O. and Khudyakov V. V. Structure and Properties of Fluoroplastic Modified with Titanium Nanoparticles

  3. Baronin G. S., Buznik V. M., Dmitriev O. S., Zavrazhina . V., Mishchenko S. V., Zavrazhin D. O. and Khudyakov V. V. Thermophysical Properties of Fluoropolymer Composites with Cobalt Nanoparticles

  4. Burenina O.N. and Savvinova M. E. Sources of Mineral Raw Materials for the Production ofBuilding Materials of the Republic of Sakha (Yakutia)

  5. Burmasheva N. V. and Prosviryakov E. Yu. Exact Solution for the Layered Convection of a Viscous Incompressible Fluid at Specified Temperature Gradients and Tangential Forces on theFree Boundary

  6. Burov A. E. , Lepikhin A. M. and Moskvichev V. V. Strength and Reliability Analysis of Metal-Composite Overwrapped Pressure Vessel

  7. Doletskaya L. I., Solopov R. V., Kavchenkov V. P. and Andreenkov E. S. Analyzing the Reliability of Mechanical Parts in 10 kV Aerial Transmission Lines under Ice-Coating and WindEffects in View of Their Design Features

  8. Doronin S.V. Projections of Limiting States for Load-Bearing Structures of Reflectors Made ofPolymer Composites

  9. Doronin S. V., Reizmunt E. M. and Filippova Yu. F. Design Evaluation of Safety Factors for Reflector Skeleton Made of Polymer Composites

  10. Drukarenko N. A., Kamantsev I. S., Kuznetsov A. V., Vladimirov A. P. and Khudorozhkova Yu. V. Numerical and Experimental Approaches to the Evaluation of theFatigue Life of a Cylindrical Specimen made of the 09G2S Steel

  11. Emelyanov I. G., Mironov V. I. and Kuznetsov A. V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision

  12. Eremina G. M. and Smolin A. Yu. Numerical Study of the Influence of the Thickness and Roughness of TiN Coatings on Their Wear in Scratch Testing

  13. Fedorov Yu. Yu., Popov S. N., Savvina A. V., Vasilyev S. V. and Rodionov A. K. A Simplified Method to Determine Resistance to Rapid Crack Propagation in Polyethylene Pipes

  14. Fedotov A. I., Kuznetsov N. Y., Lysenko A. V. and Vlasov V. G. Car Suspension SystemMonitoring under Road Conditions

  15. Filin S. A., Rogalin V. E. and Kaplunov I. A. Improving Resource of Metal Mirrors for Powerful Lasers

  16. Filin S. A., Rogalin V. E., Kaplunov I. A. and Zingerman K. M. Physical-Chemical Purification of Power Metal Optics for Increasing Its Service Life

  17. Gorkunov E. S., Povolotskaya A. M. and Zadvorkin S. M. Differential Evaluation of the Magnetic State of Wire Packages

  18. Gorkunov E. S., Yakushenko E. I., Zadvorkin S. M. and Mushnikov A. N. Analytical Description of Changes in the Magnetic States of Chromium-Nickel Steel under Uniaxial Elastic Deformation

  19. Gorshkov A. V. and Prosviryakov E. Yu. Complex Large-Scale Convection of a Viscous Incompressible Fluid with Heat Exchange According to Newtons Law

  20. Gorshkov A. V. and Prosviryakov E. Yu. Convective Flow in the Solid Rotation of a Viscous Incompressible Fluid

  21. Illarionov A. G., Stepanov S. I. and Demakov S. L. Fracture Surface Analysis of a Quenched (a+b)-Metastable Titanium Alloy

  22. Kanyukov S. I., Konovalov A. V. and Muizemnek O. Yu. Intersubjective Decision-Making for Computer-Aided Forging Technology Design

  23. Khalevitsky Yu. V., Konovalov A. V., Burmasheva N. V. and Partin A. S. Linear Solver Performance in Elastoplastic Problem Solution on GPU Cluster

  24. Kislyakov M. A., Chernov V. A., Maksimkin V. L. and Bozhin Yu. M. Features of Electromagnetic Processes in Electric Gas Turbine Installations

  25. Kislyakov M. A., Chernov V. A., Maksimkin V. L. and Bozhin Yu. M. Ideology of a Multiparametric System for Estimating the Insulation System of Electric Machines on the Basis of Absorption Testing Methods

  26. Kondakov A. S. Thermal Calculation in Branch Pipe Cavity of Fire Hydrant in Conditions of Far North

  27. Koroleva L. F. Abrasive Properties of Modified Oxides for Finish Polishing of Steel

  28. Kryuchkov D. I. and Zalazinsky A. G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials

  29. Kryuchkov D. I., Berezin I. M., Nesterenko A. V., Zalazinsky A. G. and Vichuzhanin D. I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method

  30. Kuznetsov A. V., Kamantsev I. S., Zadvorkin S. M., Drukarenko N. A., Goruleva L. S. and Veselova V. E. Evaluating the Damage of Steel 09G2S under Static and Cyclic Loading with Regard for the Level of Residual Stresses in the Metal

  31. Kuznetsov N. Yu., Fedotov A. I. and Vlasov V. G. Test Benches for Studying the Properties of Car Tyres

  32. Loginov Yu. N., Pervukhin A. E., Babailov N. A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing

  33. Loginov Yu. N. and Puzanov M. P. Finite Element Modeling of the Upsetting of an Anisotropic Cylindrical Workpiece

  34. Loginov Yu. N., Babailov N. A. and Polyansky L. I. The Properties of Coke Breeze Briquettes Produced by Ram Briquetting

  35. Lozhkomoev A. S., Kazantsev S. O. and Glazkova E. A. Synthesis and Adsorption Properties of Hollow Tubular Alumina Fibers

  36. Lyamets L. L., Yakimenko I. V., Kanishchev O. A. and Bliznyuk O. A. Small Sample Estimation of the Reliability Function for Technical Products

  37. Maisuradze M. V. and Ryzhkov M. A. The Dependency of Mechanical Properties on the Microstructure Anisotropy Index of Some Alloyed Steels

  38. Malikov V. N., Dmitriev S. F., Katasonov A. O., Sagalakov A. M. and Ishkov A. V. Subminiature Eddy-Current Transducers Designed to Study Welded Joints of Titanium Alloys

  39. Mironov V. I., Lukashuk O. A. and Ogorelkov D. A. Estimation of Metallic Structure Durability for a Known Law of Stress Variation

  40. Mishchenko S. V., Zavrazhin D. O., Zavrazhina . V. and Tugolukov . N. Numerical Simulation of the Temperature Field and Microwave Absorption by Carbon Nanotubes and Polymer Composites

  41. Moskvichev E. V. and Khakhlenkova A. A. Analyzing the Surface Accuracy of a RigidReflector under Mechanical and Thermal Loading

  42. Nikolaeva L. A. and Burenina O. N. Justification of Rational Parameters of Briquetting UsingMechanic Activation Techniques

  43. Ovchinnikov N. P., Portnyagina V. V. and Sobakina M. P. Dependence of the Mean Time to Failure of a Hydraulic Balancing Machine Unit on Different Factors for Sectional Pumps of the Alrosa JSC

  44. Panin S. V., Vlasov I. V., Maruschak P. O., Moiseenko D. D., Berto F. and Vinogradov A. Influence of Stress Concentrator Shape and Testing Temperature on Impact Bending Fracture of17Mn1Si Pipe Steel

  45. Aleksandr Pervikov, Nikolay Rodkevich, Elena Glazkova and Marat Lerner Bimodal Metal Micro-Nanopowders for Powder Injection Molding

  46. Petrova P. N., Gogoleva O. V. and Mayer A. F. Influence of Ultrasound and Discrete Basalt Fibers on the Properties of Ultrahigh Molecular Weight Polyethylene

  47. Prosviryakov E. Yu. and Spevak L. F. Simulation of a Viscous Flow in Layered Composites in View of the Thermocapillary Effect

  48. Pyshmintsev I. Yu., Bityukov S. M., Pastukhov V. I., Danilov S. V., Vedernikova L. O. and Lobanov M. L. Evolution of Microstructure in Stainless Martensitic Steel for Seamless Tubing

  49. Savrai R. A., Makarov A. V., Gorkunov E. S., Soboleva N. N., Kogan L. Kh., Malygina I. Yu., Osintseva A. L. and Davydova N. A. Eddy-Current Testing of Fatigue Degradation upon Contact Fatigue Loading of Gas Powder Laser Clad NiCrBSiCr3C2 Composite Coating

  50. Savrai R. A. and Kuznetsov A. V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch

  51. Shalimov A. S. and Tashkinov M. A. An X-FEM Model of Crack Propagation in the Matrix of Randomly Reinforced Heterogeneous Media

  52. Shipacheva E. N., Petunin A. A. and Berezin I. M. A Genetic Algorithm Used for Solving One Optimization Problem

  53. Solovei V. D. and Kolmogorov V. L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory

  54. Spevak L. F. and Kazakov A. L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method

  55. Spevak L. F. and Nefedova O. A. Solving a Two-Dimensional Nonlinear Heat ConductionEquation with Nonzero Boundary Conditions by the Boundary Element Method

  56. Starostin N. P. and Vasilieva M. A. Technological Parameters of Welding of Branch Saddles to Polyethylene Pipes at Low Temperatures

  57. Starostin N. P. and Ammosova O. A. Calculation of the Technological Parameters of Electrofusion Welding of Polyethylene Pipes at Low Temperatures

  58. Stepanova L. V. The Generalized Fracture Criteria Based On the Multi-parameter Representation of the Crack Tip Stress Field

  59. Stepanova L. V. Modeling of Crack Growth under Mixed-Mode Loading by a Molecular Dynamics Method and a Linear Fracture Mechanics Approach

  60. Taratorkin I. A., Derzhansky V. B. and Taratorkin A. I. Methods for Predicting Dynamic Loading of Friction Disks

  61. Tikhonov R. S. and Starostin N. P. Experimental Evaluation of the Efficiency of Thermal Diagnostics of Friction in a Sliding Bearing System with Regard for Shaft Rotation Speed

  62. Volkov S. S., Struzhanov V. V. Fatigue Durability under Random Cyclic Loading

  63. Voronin and Chaplygin K. K. Finite Element Analysis of the Upsetting of a 5056 Aluminum Alloy Sample with Consideration of Its Microstructure

  64. Voronin S. V. and Loboda P. S. Methods for Producing Foamed Aluminum

  65. Yepin V. V., Tsvetkov R. V., Shardakov I. N. and Shestakov A. P. Investigation of Natural Oscillations of a Viscous Liquid in an Elastic Tube

  66. Zalazinskaya E. A.and Zalazinsky A. G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body

  67. Zalazinsky A. G., Kryuchkov D. I., Nesterenko A. V. and Titov V. G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite Blanks

  68. Zamaraev L. M. and Smirnov S. V. High-Temperature Short-Term Creep of the Grade 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium

  69. Zlobina I. V., Bekrenev N. V. and Muldasheva G. K. Influence of the Microwave Electromagnetic Field on the Micro- and Nanostructure of Reinforcing Topological Structures Based on Carbon Fibers

  70. Sidashov A. V. and Kolesnikov I. V. Nonequilibrium Processes of Segregation and Diffusion in Metal-Polymer Tribosystems

  71. Pugacheva N. B., Khudorozhkova Yu. V. and Derevyankin E. V. EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation

  72. Berezin I. M., Polyakov A. P. and Polyakov P. A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion

  73. Gorkunov E.S., Zadvorkin S.M. and Goruleva L.S. Specific Features of the Determination of Residual Stresses in Materials by Diffraction Techniques

  74. Semenov A. A. Stability of Cylindrical Shell Panels of Modern Materials under Dynamic Loading

  75. Loginov Yu. N., Golodnov A. I., Stepanov S. I. and Kovalev E. Yu. Determining the Youngs Modulus of a Cellular Titanium Implant by FEM Simulation

  76. Alekseeva E. L., Belyaev A. K., Pasmanik L. A., Polyanskiy A. M., Polyanskiy V. A., Tretiakov D. A. and Yakovlev Yu. A. A Study of Hydrogen Cracking in Metals by the Acoustoelasticity Method

  77. Kazantsev S. O. Study of Surface Acid-Base Characteristics of Aluminum Hydroxide Nanostructures

  78. Korolev A. P., Makarchuk M. V., Dutov M. N. and Loskutova A. D. A Methodology for Investigating Short-Range Fields of Cluster Nanostructures

  79. Panin S. V., Kornienko L. A., Nguyen Duc Anh, Alexenko V. O., and Ivanova L. R. Enhancement of Mechanical and Tribotechnical Properties of Polymer Composites with Thermoplastic UHMWPE and PEEK Matrices by Loading Carbon Nanofibers/Nanotubes

  80. Panin S. V., Kornienko L. A., Huang Qitao, Alexenko V. O. and Ivanova L. R. Functionalization of Powder and Fibrous Microfillers for UHMWPE by Treatment with Polyorganosiloxane

  81. Panin S. V., Kornienko L. A., Buslovich D. G., Alexenko V. O. and Ivanova L. R. Influence of Load and Sliding Velocity on Wear Resistance of Solid-Lubricant Composites of Ultra-High Molecular Weight Polyethylene

  82. Rogozhin M., Rogalin V., Krymsky M. and Kaplunov I. On the Possibility of Increasing the Resource of High Power Laser Optics by Using Two-Component Output Windows

  83. . ., . ., . ., . . B2-L10 Co38Ni33Al29

  84. . ., . ., . .

  85. . ., . ., . .

  86. . ., . ., . ., . . :

  87. . ., . . - -

  88. . ., . .

  89. . ., . . :

  90. . ., . . :

: (343) 375-35-83 e-mail: conf_mrdmk@imach.uran.ru